Larson Electronics Explosion Proof Panelboard - C1D1/2 - 230-400V AC 3PH - 225A Rated MCB - Photocell

The EPPB-3P4W-225AMB-1X100A-6X40A-DNS from Larson Electronics is an Explosion Proof Lighting Distribution Board for Class I, Division 1 & 2 and Class II, Division 1 & 2 facilities. The 3-pole, 4-wire panelboard features a primary voltage of three-phase 230-400V AC 60 Hz and a 225-amp rated main panel. Constructed of copper-free aluminum with stainless steel hardware, the IP66-rated unit is equipped with a photocell. The EPPB-3P4W-225AMB-1X100A-6X40A-DNS is suitable for circuit protection in hazardous locations. This unit features a primary voltage of three-phase 230-400V AC 60 Hz and a 225-amp rated main breaker. Taking on a 3-pole 4-wire configuration, the explosion proof panelboard consists of one, 100-amp 3-pole breaker (protecting the panel), one, 40-amp 1-pole breaker and six, 16-amp 1-pole breakers. For security, this unit is pad lockable in the ON or OFF position (accepts up to 3 padlocks). Operators are provided access to a photocell on the lighting panel board, with on/off controls. This explosion proof panelboard is constructed of copper-free aluminum, with stainless steel hardware. Equipped with aluminum closing plugs, the unit is finished in aluminum lacquer for durability. The IP66-rated panelboard is approved with the following explosion proof ratings: Class I, Divisions 1 & 2 Groups B, C, D; Class II, Divisions 1 & 2 Groups E, F and G; and Class III. Mounting/Hubs: The EPPB-3P4W-225AMB-1X100A-6X40A-DNS can be mounted on flat surfaces. One, 1.5" NPT hub located the top of the unit and nine, 3/4" NPT hubs located at the bottom of the enclosure are available for completing connections. Applications: Industrial facilities, hazardous locations, offshore refineries, marine locations, indoor/outdoor spaces, agricultural sites, ship yards, docks and more. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information EPPB-3P4W-225AMB-1X100A-6X40A-DNS Explosion Proof Panelboard Ratings Unit Type: Explosion Proof Lighting Panelboard Class I, Div 1&2 Groups B,C,D Dimensions: - Class I, Zones 1&2 Groups IIB+H2, IIA Primary Voltage: 230-400V AC 3PH 60 Hz Class II, Div 1&2 Groups E,F,G Main Panel Amp Rating: 225A Class III, Div 1&2 Configuration: 3 Pole 4 Wire NEMA 4X, 7 (IP66) Breakers: (1) 100A, (1) 40A, (6) 16A CENELEC/ATEX/IEC - Ex Temp Rating: -20¼C to +60¼C Ex d IIB + H2 T5 or T6 Materials: Copper Free Aluminum, SS Hardware Ex tD A21 IP66 Finish: Aluminum Lacquer Finish Special Orders- Requirements Mount: Surface Contact us for special requirements Wire Size: 4/0 AWG (Input), 1/0 AWG (Ground) Toll Free: 888-325-4448 Hubs: (1) 1.5" NPT (Top), (9) 3/4" NPT (Bottom) Intl: 1-903-270-1187 Devices: Photocell E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*