Larson Electronics Explosion Proof Mushroom Push Button Switch - C1D1/C2D1 - DPDT Switch - (2) NO, (2) NC

The Larson Electronics EPS-PB10-DPDT explosion proof single push button switch is designed for use in hazardous work areas, such as chemical plants, oil refineries and settings where combustible gases or dust may be present. This 10-amp device features the following explosion proof ratings: Class I Division 1 and 2; and Class II Division 1 and 2. In industrial and commercial settings, the front-operated DPDT push button switch may be used to support basic features of machines lacking electrical circuits for control. When ordering this unit, buyers may choose from 1/2" and 3/4", dead end and feed thru options. Features: This explosion proof push button switch is rated for 10 amps at 600 VAC 60 Hz. This push button features a switch configuration of 2 normally open and 2 normally closed. The double pole, double throw (DPDT) device supports operating temperatures between -20¡ to 40¡C. It is enclosed in a separate sealing chamber, and the sealing chamber has smooth, double flanges that mate both to the cover and the mounting enclosure to provide flame tight joints. On this unit, the screws consist of stainless steel hex head screws and attach the sealing chamber to cover and mounting enclosure. The switch is supplied with an internal ground screw. Its housing is constructed of copper-free aluminum, finished with aluminum acrylic paint. With the robust protruding button design, workers using thick gloves may find the device easier to activate, compared to a traditional push button switch design. Options: This device features _” and _” dead end and feed thru options. Both options come with Class 1 Division 1 and 2 (Groups C and D), Class 2 Division 1 and 2 (Groups E, F and G) and Class 3 explosion proof ratings. The components also comply with UL 894, UL 1203 and UL 698 standards, and support NEMA 3/7, CSA Standard: C22.2 No. 30 ratings. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPS-PB10-DPDT Explosion Proof Push Button Ratings/Features: Unit Type: Explosion Proof Push Button Switch Listed for United States & Canada Dimensions: 5 3/32" x 3 1/2" x 3 1/16" Class I, Div 1 & 2, Group B, C, D Weight: 8 lbs Class II, Div 1, Groups E, F, G Voltage: 600V AC Class II, Div 2, Groups F, G Amps: 10A Class III Switch Type: Double Pole, Double Throw (DPDT) NEMA 3, 7 (C,D), 9 (E, F, G) Contacts: (2 Sets) NO and NC Operating Temp: -20C to +40C Special Orders- Requirements Material: Copper Free Aluminum Contact us for special requirements Mount: Surface/Conduit Phone: 1-214-616-6180 Configuration: Dead End or Feed Thru Toll Free: 888-325-4448 Hub Size Options: 3/4" NPT or 1/2" NPT Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase-