Larson Electronics Explosion Proof Magnetic LED Strobe Light - 4Hz - 10 Watts - C1D1 - IP67 - 25' SOOW Cigarette Plug

Made in the USA The EPSLED-80-M-25-CP Magnetic Mount Explosion Proof LED Strobe Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D, paint spray both approved, and produces 4 flashes per second. Water proof and IP67 rated , this LED equipped light is magnetic mount for temporary use and available with several color and operates on 12V DC or 24V DC. The powerful and durable EPSLED-80-M-25-CP magnetic mount explosion proof LED strobe light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable strobe light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with red, blue, green, amber, purple and white flash colors. This temporary explosion proof signal light is equipped with 25` of power cable and terminated in a cigarette plug. Click Photo to Enlarge This hazardous area strobe light carries a T3C temperature rating and is UL Listed Class 1, Groups C and D, Class 2, Groups E and F, and Class III, Groups E, F and G. This strobe light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring consists of 25` of power cable terminated in a cigarette plug. Please note, the power connection must be made outside of the hazardous location. The 7 watt LED lamp in this unit offers exceptional power and a 50,000+ hour life span and is energized by leads which pass through sealing compound that separates the lamp chamber from the wiring compartment. The LED lamp assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. The LED lamp in this low voltage strobe light offers a 50,000+ hour lifespan and a 4hz flash rate. Mounting consists of a 200lb magnetic base for temporary mounting on any ferrous surfaces. The LED lamp is multi-voltage capable and operates on a voltage range of 12V DC or 24VDC. Specifications / Additional Information EPSLED-80-M-25-CP Strobe U.L Ratings Lamp Type: LED Class 1, Groups C and D Lamp Dimensions: 7.25"-Wide, 16" Height Class II, Groups E and F Lamp Weight: 9 lbs Class III, Groups E, F and G Voltage: 12VDC or 24VDC IP67 (water proof) LED Watts: 7W Suitable for Paint Spray Booths Lumens: T3C Temperature Rating Lamp Life: 50,000+ Hours Lighting Configuration: Strobing Flash Strobe Count: 4 Per Second Temp Rating: T3C Special Orders- Requirements Hub: 3/4" Threaded Contact us for special requirements Wiring: 25` cable w/ cigarette plug Toll Free: 888-325-4448 Mounting: 200lb magnetic grip base Fax: 1-903-498-3364 E-mail: [email protected] Scroll Down to Purchase