Larson Electronics Explosion Proof LED String Lights - 8 Lights - C1D1&2 and C2D1&2 - 60' Input Whip

Made in the USA The Larson Electronics EPL-SL-8-LED-60 Explosion Proof String Light set is UL Listed Class I Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection. Click here to see the Incandescent version of this light This explosion proof string light set from Larson Electronics contains a total of eight 10 watt work lights equipped with aluminum hooks and connected in series along 70 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated in a Class I, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. A 60 foot tail section of main SOOW cord is included to allow ample length for connection to power sources. 10 Watt LED Bulb Molded T Connector w/ Hook Ring 60` whip w/ EXP Plug Click Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge 100 Watt Incandescent Bulb With the EPL-SL-8-LED-60 Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This unit incorporates eight explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space. Click Photos to Enlarge 5-15 Straight Blade Plug 6-20 Straight Blade Plug This stringer light set is Class I, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277 VAC and 11-25 VDC, please choose your configuration below. A 60` input whip terminated in an explosion proof cord cap completes the explosion proof protection of this string light. Cord cap options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Stringer Energy Consumption Comparison Incandescent CFL LED Wattage 1000 watts 260 watts 80 watts Amp Draw @ 120V AC 8.34 amps 2.17 amps 0.67 amps Amp Draw @ 277V AC 3.61 amps 0.94 amps 0.29 amps Amp Draw @ 12V DC 83.34 amps 21.67 amps 6.67 amps Amp Draw @ 24V DC 41.67 amps 10.84 amps 3.34 amps Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours Color Temperature 2800K 4300K 6000K Operation cost per year(8hs/day @ 11c/kWh) $321.2 $83.52 $25.70 At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. Total of (8) 10 watt LED Lamps.4. Non-sparking aluminum construction.5. UL Class I Div 1-2 Class II Div 1-27. 120-277V AC or 11-25V AC/DC Operation8. SOOW cable.9. Aluminum Hooks for Convenient Placement. 100 watts of LED illuminationNon-sparking aluminum housingsLight weight mold T JunctionsCast aluminum guard prevent lamp or globe damageTempered Soda-Lime Glass Lamp GlobeIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operation14/3 SOOW Abrasion Resistant Cable Specifications / Additional Information EPL-SL-8-LED-60 Ratings Listing: United States Class I, Divisions 1 & 2, Groups C, D Dimensions- Each Lamp: L-16.5" Diam-5" Class II, Divisions 1 & 2, Groups, F, G Total Watts: 80 Class I, Zone 1, Group IIB Single Lamp Watt: 10 watts NEMA 4X Voltage: 120-277V AC or 11-25V AC/DC Amps: 0.67 120V AC Mounting: Handheld / Hanging via Aluminum Hooks Wiring: 130` 14/3 SOOW Cable - 10` between lamps - 60` input whip Special Orders- Requirements Cord Cap: 5-15 or 6-20 Explosion Proof Plug Contact us for special requirements Total Length: 130` Toll Free: 888-325-4448 Single Lamp Weight: 6 lbs Total Weight: 50 lbs E-mail: [email protected]