Larson Electronics Explosion Proof LED String Lights - 7 lights - Class 1 Division 1 and Class 2 Division 1

Made in the USAThe Larson Electronics EPL-SL-10-LED Explosion Proof String Light set is UL Listed Class 1 Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.Click here to see the Incandescent version of this lightThis explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and connected in series along 90 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated in a Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 25 foot tail section of main SOOW cord is included to allow ample length for connection to power sources. 10 Watt LED BulbMolded T Connector w/ Hook Ring 25` whip w/ EXP PlugClick Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge 100 Watt Incandescent BulbWith the EPL-SL-10-LEDUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space. Click Photos to Enlarge5-15 Straight Blade Plug 6-20 Straight Blade Plug This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277 VAC and 11-25 VDC, please choose your configuration below. A 25` input whip terminated in an explosion proof cord cap completes the explosion proof protection of this string light. Cord cap options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Stringer Energy Consumption ComparisonIncandescentCFLLEDWattage1000 watts260 watts100 wattsAmp Draw @ 120V AC8.34 amps2.17 amps0.84 ampsAmp Draw @ 277V AC3.61 amps0.94 amps0.36 ampsAmp Draw @ 12V DC83.34 amps21.67 amps8.34 ampsAmp Draw @ 24V DC41.67 amps10.84 amps4.17 ampsLamp Life Expectancy1,500 hours8,000 hours 50,000 hoursColor Temperature2800K4300K6000KOperation cost per year(8hs/day @ 11c/kWh)$321.2$83.52$32.12Made in USA QualityLamp Features1. Chemical and abrasive resistant cord2. Explosion Proof.3. Total of (10) 10 watt LED Lamps.4. Non-sparking aluminum construction.5. UL Class 1 Div 1 Class 2 Div16. Red and gray paint finish 7. 120-277V AC or 11-25V AC/DC Operation8. SOOW cable.9. Aluminum Hooks for Convenient Placement.100 watts of LED illuminationNon-sparking aluminum housingsLight weight mold T JunctionsCast aluminum guard prevent lamp or globe damageTempered Soda-Lime Glass Lamp GlobeIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operation14/3 SOOW Abrasion Resistant CableSpecifications / Additional Information EPL-SL-10-LEDRatingsListing: United States Class 1, Divisions 1 & 2, Groups C, D Dimensions- Each Lamp: L-16.5" Diam-5" Class 2, Divisions 1 & 2, Groups, F, G Total Watts: 100Class 1, Zone 1, Group IIBSingle Lamp Watt: 10 wattsNEMA 4XVoltage: 120-277V AC or 11-25V AC/DCAmps: 0.84 120V ACMounting: Handheld / Hanging via Aluminum Hooks Wiring: 115` 14/3 SOOW Cable - 10` between lamps - 25` input whipSpecial Orders- RequirementsCord Cap: 5-15 or 6-20 Explosion Proof PlugContact us for special requirements Total Length: 115`Toll Free: 888-325-4448 Single Lamp Weight: 6 lbsIntl: 1-903-270-1187Total Weight: 65 lbsE-mail: [email protected]