Larson Electronics Explosion Proof LED Light - Class 1 & 2 Division 1 & 2 LED Light

Made in the USA The EPLSB-LED-12W Explosion Proof LED light from Larson Electronics can be configured to run on 120/240 Volts AC or 12/24 Volts DC and provides operators with a very long lived and powerful alternative to traditional HID and incandescent strobe lights. Weather proof and Nema 4X compliant for marine use, this LED light is avaliable in a variety of mounting configurations and has several color options available. The powerful and durable EPLSB-LED-12W explosion proof LED light from Larson Electronics is approved for use in marine locations and is ideal for industrial applications, confined spaces, hazardous work areas where a powerful and durable alternative to standard incandescent and HID lighting is preferred. The lamp housing is weatherproof and constructed of copper-free aluminum alloy featuring a baked on powder coat finish, o-ring sealed glass dome with double pitch acme threads, and stainless steel hardware for corrosion resistance. This unit is not intended for high bay applications but performs well at standard heights and is available in red, blue, green, amber, and white LED colors. This hazardous area light is UL Listed Class 1 Division 1, Groups C and D, Class 1 Division 2 Groups A, B, C, D, and Class 2, Division 2, Groups F and G. These lights are also compliant with NEMA 4X standards and marine-rated for use in salt water environments. The high power LED cluster is protected by an internal cooling fin array that reduces heat build for longer LED life and higher light output consistency. These LED explosion proof lights have 3/4" hubs and can be can be configured to run on 120/240 Volts AC or 12/24 Volts DC. This LED light has a T6 temperature rating and an operating temp range of -55 C to 85 C. The LED output of these beacons is rated at 141 Candela and provides highly effective light output that compares to traditional incandescent and HID units. This explosion proof LED light is warranted for 5 years against manufacturing defects. Suggested applications: ship yards, boat yards, plants, manufacturing, vessels, petrochemical plants, barges and oil rig and oil field applications. Made in the USA Quality LED Benefits 1. High Power LED.2. Heat Baked Powder Coat Finish.3. Rugged Non Sparking Aluminum Lamp Housing.4. Shock Resistant Glass.5. Sealed Glass Enclosure.6. Efficient Heat Dissipation.. 7. Low Maintenance.8. Corrosion Resistant Nema 4X Marine Compliant.9. Stainless Hardware. 10. Double Pitch Acme Threads. 1. Long lamp life.2. High efficiency and low amp draw.3. High durability and reliability.4. High output and very good color rendering.5. Vibration and shock resistant.6. Low maintenance.7. Low temperature.8. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPLSB-LED-12W U.L Ratings Lamp Type: LED Class 1 Div 1 -Groups C, D Lamp Dimensions: 7.44"-Diameter, 11.1" Height Class 1 Div 2 -Groups A, B, C, D Lamp Weight: 12 lbs Class 2, Division 2, Groups F, G Hub: 3/4" Threaded NEMA 4X Candela: 141 Suitable for Marine Environments Voltage: 120/240 Volts AC or 12/24 Volts DC T6 Temperature Rating Lighting Configuration: Steady Burn -55 C to 85 C Operating Temp Mounting: 3/4" Hub- Wall, Ceiling, or Pendant Mount Amp Draw: 0.1 @ 120VAC, 1 @ 12VDC, 0.5 @ 24VDCLamp Weight: 12 lbs U.L. Listing: Classified by the National Electric Code Special Orders- Requirements Total Lumens: N/A Contact us for special requirements Wiring: 3/4 inch Threaded Hub Toll Free: 888-325-4448 Temp Rating: T6 - All Voltage and Temperature Ranges Fax: 1-903-498-3364 In-rush Current: 100 mA @ 120 VAC - 300 mA in-rush // 50 mA @ 240 VAC - 150 mA in-rush E-mail: [email protected] Operating Temp: -55 C to 85 C 5 year warranty replacement on this LED light. Scroll Down to Purchase