Larson Electronics Explosion Proof LED Paint Spray Booth Light - C1D1, 2nd Gen - 6' SOOW Cable w/ EXP Cord Cap

The Larson Electronics EPL-48-2L-LED-G2-6C-EPP Explosion Proof LED Light Fixture is a powerful lighting solution for Class I and Class II rated combustible sites. This 56-watt, 2-lamp explosion proof LED light has a T6 temperature rating and a carries a paint spray booth light certification. Equipped with 6` of SOOW cord and an explosion proof cord cap, the LED fixture caters to surface mounting applications (pendant optional). The EPL-48-2L-LED-G2-6C-EPP is equipped with specially designed LED T-series bulbs which produce 30% more foot candles of illumination at 8 feet, compared to standard T8 lamps when measured with an Extech light meter. Capable of offering 7,000 lumens of light with a 5600K color temperature rating, our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. A 150¡ beam angle configuration ensures comprehensive illumination and increased safety at the work site. The 28-watt LED lamps produce more illumination than standard T8 bulbs. This LED version, with a total of 56 watts, draws only 0.5 amp. The unit is multi-voltage (universal) and operates on any voltage from 120V to 277V AC 50/60hz. We also make a 12/24V DC version for low voltage applications (-LV suffix) for DC power. We have replaced two 8 foot dual lamp T8 fixtures in our own facility with our LED T-series lamps and produced more illumination in the work area with only one 2 lamp 4 foot long LED fixture. We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. Energy Consumption Comparison T5HO T8 LED Wattage 108 watts 64 watts 56 watts Amp Draw @ 120V AC 0.9 amps 0.54 amps 0.47 amps Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.20 amps Amp Draw @ 12V DC 9 amps 5.34 amps 4.67 amps Amp Draw @ 24V DC 4.5 amps 2.67 amps 2.34 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Color Temperature 5000K / 4100K 4100K 5300K Operation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $17.99 LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard T8 bulbs. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring & Plug: The EPL-48-2L-LED-G2-6C-EPP is equipped with 6` of chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the security camera will occur. Our EPL-48-2L-LED-G2-6C-EPP LED light fixture is Our EPL-48-2L-LED-G2-6C-EPP LED light fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations. Standard Bracket Mount: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Additional Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-48-2L-LED-G2-6C-EPP Explosion Proof LED Light RatingsLamp Technology: LED Class I, Division 1 Groups C,DDimensions: W-11.25" L-52" H-8.5" Class I, Division 2 Groups A,B,C,DLED Lamp Qty: (2) Class II, Division 1&2 Groups E,F,GWeight: 45 lbs NRTL Certified to UL 595 Marine Type (Saltwater)Voltage: Universal 120-277VAC 50/60 Hz NRTL Certified to UL 844, 924Single-lamp Watts: 28W NRTL Certified to UL 1598 Marine TypeTotal Watts: 56W NRTL Listed for United States & CanadaSingle-lamp Lumens: 3,500 lms Paint Spray Booth ApprovedTotal Lumens: 7,000 lms California Title 24 CompliantLuminous Efficacy: 98.21 lm/w LED Life Expectancy: 50,000+ Hours Color Temperature: 5600K Color Rendering Index: - Lamp Type: T8 Style LED Tubes (2nd Gen) Lamp Base: - Replacement Lamp: - Beam Angle: 150¡ Lighting Configuration: Flood Power Efficiency: - Power Factor: - Amps: 0.46A @ 120V, 0.23 @ 240V, 0.2 @ 277V Ambient Operating Temp Range: -30¡C to +85¡C Operating Temp Rating: T6 Rated Special Orders- RequirementsMinimum/Maximum Case Temp: -30¡C/90¡C Contact us for special requirementsMaterial: Non-sparking Phone: 1-214-616-6180Mounting: Surface Standard - Pendant Optional Toll Free: 888-325-4448Wiring: 6` SOOW w/ EXP Cord Cap Fax: 1-903-498-3364EXP Cord Cap Options: 5-15P, 5-20P or 6-20P E-mail: [email protected]