Larson Electronics Explosion Proof GFI Whip - 20 Amp EXP Outlet - Inline Switch - SOOW Chemical Resistant Cord

Made in the USA Larson Electronics Explosion Proof Explosion Proof GFI Cord Whip with inline switch. Class 1 Division 1 and Class 2 Division 1 Approved. The EPEXC-GFI-20O-ISL Explosion Proof cord whip allows operators to safely operate their explosion proof light or equipment cords beyond the boundaries of the hazardous work area from standard industrial outlets. These units are constructed of 3 feet of 14/3 SOOW explosion proof cord and are rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with an inline, 20 amp, GFI protected, explosion proof receptacle with on/off switch installed on one end and a standard industrial 5-15 plug installed on the other end. The receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. This inline explosion proof tumbler switch is ideal rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1. This explosion proof switch is rated at 20 amps-120-277 Vac and 1 HP at 120 Vac and 2 HP at 240 Vac. The entire unit is constructed of malleable iron and contains an internal sealing chamber constructed of copper free aluminum. A bushing seal at each conductor opening prevents damage to wiring insulation and a triple coat housing finish provides rugged protection against corrosion. The plug on this units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-GFI-20O-ISL EXP GFI Cord Whip w/ Inline Switch GFI Outlet Switch Certifications Amp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and D Dimensions: Cord-3 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups E, F and G Configuration: 3 Pole 2 Wire Suitable Plug Cable Diameter: .538” to .639” Switch Voltage Rating: 120-277 VAC Switch Current Rating: 20 Amps- 1 HP @120 Vac & 2 HP @ 240 Vac Switch Type: Single Pole Receptacle Specs: Inline Receptacles Configuration: 3 Pole 2 Wire Materials: Copper Free Aluminum Dims:- Single Receptacle- 3"-W X 5.69"-D X6.13"-H Special Orders- Requirements Mating Plugs: ****EPP-15A, EPP-20-A**** Contact us for special requirements Finish: Epoxy Powder Coat Toll Free: 888-325-4448 U.L. Certification Fax: 1-903-498-3364 E-mail: [email protected]