Larson Electronics Explosion Proof Fluorescent Drop Light w/ General Use Cord Reel - 50ft 14/3 SOOW - 26 Watts - C1D1

Made in the USA The Larson Electronics EPLFL-26W-P-120-GR50 Hazardous Area Fluorescent Work light and on industrial cord reel is approved Class 1 Division1 Groups C and D and are ideal for close quarter work and inspection activities in hazardous locations requiring explosion proof protection. This 26 watt explosion proof fluorescent work light from Larson Electronics produces 1800 lumens of illumination and comes complete with an industrial grade cord reel with spring ratchet mechanism. The EPLFL-26W-P-120-GR50 fluorescent drop light uses a compact fluorescent bulb to produce light which removes the need for an inline ballast assembly. The lamp body is constructed of high strength plastic and aluminum which helps to reduce weight and improve durability.This hazardous location hand lamp is Class 1, Division 1 and Class 2 Division 1 hazardous location environment approved. The general use cord reel contains this unit’s 50` of 14/3 SOOW Cord for convenient cord management. This industrial reel and explosion proof fluorescent hand lamp can be installed outside the hazardous environment and handlamp used within the hazardous location area, making it ideal for temporary lighting within hazardous work areas where a ready source of easily managed lighting is not present. Click Photos to Enlarge This 26 watt fluorescent light operates on 120 Volt current and is suitable for use in areas where petrochemical vapors and various dusts are present. The lamp creates 1,800 lumens of light, roughly equivalent to a 100 watt incandescent bulb. The bulb is backed with a white reflector which is designed to keep the light out of the operator`s eyes and focus more of the light on the subject area. Fluorescent lights are popular in paint prep, painting and post-paint inspection operations due to the even white color light produced. Incandescent lights tend to create yellowish, shadowy light that confuses the eye and makes it difficult to examine a work area with consistency. The light output, color and evenness of coverage make fluorescent lights popular for a wide variety of close quarter work and inspection activities. This explosion proof hand lamp is relatively easy to relamp. Set screws hold the 2 piece plastic cover in place over the aluminum core. Once the plastic covers are unscrewed, the bulb is revealed. The bulb is encapsulated within a glass dome, which is enveloped by the plastic outer housing. An aluminum ring is screwed into place over the lip of the dome and a o-ring style gasket ensures the seal. Once the glass dome and seal are removed, the operator can replace the 4-pin compact fluorescent bulb. Made in USA Quality Lamp Features 1. Federal Spec JC-580A Cord.2. Indoor or outdoor use.3. Standard 120 Volt operation.4. Rugged plastic and aluminum construction.5. Sealed Lamps Cover.6. UL Listed Class1 Dv 1, Class 2 Div 17. Lightweight.8. 50` 14/3 SOOW cable (On Reel)9. UL and CUL Listed.10. 4-Roller Adjustable Cable Guide and Ball Stop 26 watt fluorescent produces 1800 lumens.Plastic and aluminum housing.Compact fluorescent lamp.No inline ballast to tangle or damage.Glass lamp shield prevents shatteringLamp and glass cover protected by plastic cage.Swivel hook for hanging and hands free operation.Explosion proof Cord & Industrial Cord Reel Specifications / Additional Information EPLFL-26W-P-120-GR50 Hand Lamp on 50` Cord Reel Ratings/Approvals Listing: United States Class 1, Division 1 for Groups C, D Lamp Type: Complace Fluorescent Class II, Division 1 Groups F, G Dimensions: L-23 " Dia-4" General Area Industrial Cord Reel Total Watts: 26 watts 14/3 SOOW Cable Total Lumens: 1800 Color Temp: 4100K Special Orders- Requirements Voltage: 120V AC 60Hz Contact us for special requirements Mounting: Plastic Swivel Hook Toll Free: 888-325-4448 Wiring: 50` 14/3 SOOW Cord - Spring Loaded Cord Reel YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. E-mail: [email protected] 3 year warranty replacement on this light. After 30 days, the customer ships the failed light and/or bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll down to Purchase-