Larson Electronics Explosion Proof Enclosure - 16" x 16" x 10" Internal Dims. - C1D1 - Surface Mount - (12) 1" NPT Hubs

Made in the USA The Larson Electronics EPL-AEB-16.16.10-12X1IN-MOD1 explosion proof enclosure provides operators with a Classes I and II, Divisions 1 and 2 cast aluminum enclosure designed to hold electrical equipment up to 16" by 16" by 10" in size. This explosion proof enclosure is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. The EPL-AEB-16.16.10-12X1IN-MOD1 features twelve 1" NPT hubs. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSION PROOF ENCLOSURES* The EPL-AEB-16.16.10-12X1IN-MOD1 explosion proof enclosure is made of cast aluminum, is equipped with stainless steel hinge and bolts, and includes a watertight gasket for a NEMA 4X protection rating. The internal cavity of this flameproof enclosure measures 16" in length by 16" in width by 10" in height. A removable backplate for easy mounting of equipment outside of the enclosure can be provided at an additional cost. Mounting is provided by four ears, two per side of the enclosure. Hub Locations: The EPL-AEB-16.16.10-12X1IN-MOD1 features twelve 1" NPT wiring hubs. There are three hubs located on the north side of the enclosure, three on the south side, three on the east side and three on the west side. LarsonElectronics.com can build enclosures to your specifications. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information EPL-AEB-16.16.10-12X1IN-MOD1 Explosion Proof Enclosure Features/Ratings Internal Dimensions: 16"L x 16"W x 10"H Class I Division 1 Explosion Proof Weight: 85 lbs Class II Division 1 Explosion Proof Mounting: Surface Mount Special Orders- Requirements Hubs: (12) 1" NPT Wiring Hubs Contact us for special requirements Hub Locations: (3) on North Side, (3) on South Side, (3) on East Side & (3) on West Side Toll Free: 888-325-4448 Intl: +1-214-616-6180 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*