Larson Electronics Explosion Proof Drop Light (Hand Lamp) with C1D1 Inline Transformer - 240VAC to 12V - EXP Plug

Made in the USA The Larson Electronics EPL-240X12V-C1D1-100-EPP Explosion Proof Hand Lamp is listed Class 1 Division 1 Groups C and D and is ideal for general work activities in hazardous locations requiring explosion proof protection. This C1D1 drop light is equipped with a 100` cord with a Class 1 Division 1 inline transformer stepping down 240V to 12V and terminated in an explosion proof plug. This explosion proof work light is designed to operate on 240 volt AC current and comes with 100 feet of SOOW cable and an inline Class 1 Division 1 step down transformer terminated in an explosion proof plug. The EPL-240X12V-C1D1-100-EPP drop light housing is constructed of aluminum with a rubber bumper guard designed to provide an effective lighting solution for operators requiring a versatile source of illumination. This hazardous location hand lamp is Class 1, Division 1 approved and equipped with a 60 watt, 75 watt, or 100 watt bulb. Please specify bulb type when ordering. This explosion proof drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. Dark 40` Container 2023 Explosion Proof Plug Illuminated with EPL-240X12V-C1D1-100-2023 Click Photos to Enlarge Click Photos to Enlarge This drop light operates on 220-240V AC and steps down the voltage to 12 Volts for the light and is suitable for use in areas where petrochemical vapors and various dusts are present. This unit is rated Class 1, Division 1 and Class 2, Division 1 and comes with 100’ of SOOW 12/3 AWG cord and an inline transformer that steps down 240 VAC to 12 Volts. This lamp comes an explosion proof plug. Wiring: This unit is equipped with 100 feet of 600V 12/3 chemical and abrasion resistant SOOW cable leading to an encapsulated, Class 1 Division 1 explosion proof step down transformer. There is ten feet of 16/3 SOOW cable coming out of the inline transformer, and is terminated in a 6-20 250V rated EPP-20 explosion proof cord cap or a CPP-516 cord cap. Both the line-in and line-out cables of the transformer are terminated via EYM seal offs with Kellum style cord grips to prevent the cable from being pulled out while in the field. The transformer enclosure features a chain carry handle for easy mobility. This inline power supply for this explosion proof drop light is an auto sensing universal voltage transformer that operates on any voltage within the 100-277 volts AC 50/60Hz range. This unit allows operators to power the incandescent light from any 220-240V AC power source, and steps down AC voltage to 12V DC. This explosion proof hand light contains a 60, 75 or 100 watt bulb which operates on 12 Volts only. Please Note: 75 watt bulb maximum for compliance to Class 2 Division 1 rating. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. 60, 75, or 100 Watt Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Red and Gray paint finish.6. Class1 Div1 & Class 2 Div17. 12 Volt DC Operation8. 100` 12/3 SOOW cable leading to step-down transformer9. Hook for Convenient Placement10. Explosion proof inline stepdown transformer11. Entire unit is Class 1 Division 1 Rated Rubber bumper guardNon-sparking aluminum housing12V DC low voltage operation Aluminum lamp guardLamp shield prevent shatteringInline Stepdown transformerSwivel hook for hanging and hands free operation600V rated chemical and abrasion resistant cable Specifications / Additional Information EPL-240X12V-C1D1-100-2023 Ratings/Approvals Listing: United States Class 1, Division 1 Groups C, D (100 watt) Lamp Type: Incandescent Class 2, Division 1 Groups F, G (75 watt) Handlamp Dimensions: 16.5"L x 5"Dia Class 1, Division 2 inline transformer Handlamp Weight: 5.5 lbs Class 1, Division 1 plug Total Weight: 35 lbs Class 1, Zone 1 Group IIB Voltage: 220-240 VAC Stepped down to 12V DC NEMA 4X Total Watts: 60, 75, or 100 watts Total Lumens: 540, 675, or 900 Luminous Efficacy: 9 Lm/W Lamp Life: 750 Hours Color Temp: 2700K Lighting Configuration: 360¡ Flood Transformer Power Efficiency: >90% Transformer Power Factor: 0.95 @ 230V AC Max Amperage: 0.46A @ 240V AC Max Ambient Temp: -32¡C to +45¡C Max Operating Temp: 160¡ C (T3C) Class 1 & 2 Division 1 & 2 Special Orders- Requirements Mounting: Handheld w/ Swivel Hanging Hook Contact us for special requirements Wiring: 100` 12/3 SOOW, C1D1 Inline Transformer, 10` 16/3 SOOW Toll Free: 888-325-4448 Cord Cap: 6-20 250V C1D1 Listed Explosion Proof or CPP516 E-mail: [email protected] YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. Click here to view the Explosion Proof Light Design Description Same Day Shipping on This Light!