Larson Electronics Explosion Proof 4 Outlet Extension Cord - 4 20 Amp Outlets - 20' SOOW 10/3 Cord - 30A Twistlock Plug

Made in the USA Larson Electronics 20 Foot Long Explosion Proof Extension Cord with Four Explosion Proof Receptacles and general area use 30 amp twist lock plug. Class 1 Division 1 and Class 2 Division 1 Approved Spiderbox. The Larson Electronics EPEXC-4X-20-10.3-GAU30A Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 20 feet of 10/3 chemical and abrasion resistant SOOW cable and are rated at 30 amps of continuous service. The cord is chemical and abrasion resistant and comes with four inline, 20 amp, explosion proof receptacles installed on one end and a weatherproof twist lock plug installed on the other end. This spiderbox enables multiple electrical connections from a single power source. Each receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R (120V) or 6-20R (250V) compatible, although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Cord cap options for the line in cable on this explosion proof spider box include L5-30 and L6-30 twist lock plugs for use with general area use and weatherproof twist lock receptcables. The L5-30P twist lock plug is desigend for use with 110-120V electrical systems, while the L6-30P is designed for use with 220-240V electrical systems. Please note: the twist lock cord caps on this unit are NOT explosion proof rated and electrical connection must be made outside the hazardous environment. Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-4X-20-10.3-GAU30A Explosion Proof Extension Cord Outlet Certifications Amp Rating: 30 amp Continuous Service Class 1 Div 1 Groups C and D Line-In Cable: 20` 10/3 SOOW Class 2 Div 1 Groups F and G Cord Cap: L5-30P (120V) or L6-30P (250V) Configuration: 2 Pole 3 Wire Receptacle Specs: 4 Inline Receptacles Configuration: 2 Pole 3 Wire Materials: Copper Free Aluminum Special Orders- Requirements Dims:- Single Receptacle- 3"-W X 5.69"-D X6.13"-H Contact us for special requirements Mating Plugs: ****EPP-15A, EPP-20-A**** Toll Free: 888-325-4448 Finish: Epoxy Powder Coat Fax: 1-903-498-3364 U.L. Certification E-mail: [email protected]