Larson Electronics Class II Dual Strobe Warning Light - (2) Motion Sensors - 80' 16/3 SOOW Cord - Adjustable Timer

Made in the USA The Larson Electronics SLEDB-110V-2X-MS.SYNC-AT-80FT Class II Dual Strobe Warning Light offers reliable strobing notifications for forklift operations and tunnels. The warning system is made up of two, Class II strobe fixtures, which are equipped with motion sensors, adjustable timers and aluminum bases for wall or surface mounting. Both LED strobe lamps are connected by 80` of 16/3 SOOW cord and twist lock cord caps. The SLEDB-110V-2X-MS.SYNC-AT-80FT is a reliable warning system for forklift operations and tunnels. Consisting of two, 30-watt LED strobe lamps connected by an 80-foot SOOW cord, the Class II fixtures are capable of producing a brilliant flashing pattern that is visible even in poor conditions. Available in a choice of red, amber or blue colors, this strobing beacon is designed to be permanently mounted to a wall or other flat surfaces. A polycarbonate lens protects the LED assembly and the housing is waterproof, shock resistant and built for reliable and durable operation. This flashing beacon draws .25 amps on 120 volts, produces a highly visible 16 joules flash, and is rated Class II, contributing to the brightest intensity possible. Amber Red Blue White Green Click Images to Enlarge LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Motion Sensor/Timer: This forklift warning system is equipped with two convenient motion sensors. Located under each strobe light, when the sensors detect movement, the strobe lights are turned on. During tunnel operations, a forklift entering one side of the tunnel may set off the motion sensor and activate the strobe fixtures. This notifies operators at the other side of the tunnel that a forklift from the other end is passing through. An adjustable timer can be set to limit or extend the duration of strobing. By default, the timer is set at two minutes. The timer supports an adjustable range between 10 seconds and 15 minutes. Wiring:The SLEDB-110V-2X-MS.SYNC-AT-80FT comes with 80 feet of 16/3 SOOW cord, connecting each LED strobe light at each end via twist lock cord caps. Quick disconnects are available for managing power connections when in use. One of the strobe lamps is equipped with flying leads for completing power connections. Mount: The Class II LED strobe lamps feature an aluminum base and is designed to be permanently mounted on any flat surface. The aluminum base is predrilled with three holes for standard self-tapping screws. Applications: Forklift operations, tunnels, maintenance, repair, rugged work sites, strobe notifications, fleet warning system and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information SLEDB-110V-2X-MS.SYNC-AT-80FT Forklift Tunnel Warning Light Features Lamp Type: Flashing LED Strobe SAEJ1318, Class II- Brightest Rating Dimensions: 6.63"-H, 6.25"-D (per Strobe) Forklift Warning System for Tunnels Lamp Weight: 3.7 lbs (per Strobe) Waterproof, Shock-Impact Resistant Voltage: 110-120V AC Motion Sensor Watts: 30W (per Strobe) Dual Strobe Warning System LED Lamp Life Expectancy: 50,000+ Hours Lighting Configuration: Strobing Flash Flashes Per Minute: 54 Joules: 16 Housing Materials: Heavy Duty Anodized Aluminum Lens Material: Polycarbonate Special Orders- Requirements Mounting: Permanent Wall or Flat Surface Mount Contact us for special requirements Wiring: 80` 16/3 SOOW Cord Toll Free: 888-325-4448 Sensor Type: Motion Detector Fax: 1-903-498-3364 Timer: 2 Mins Default Setting; Adjustable Range - 10 Sec to 15 Mins E-mail: [email protected] Scroll Down to Purchase-