Larson Electronics Class I, Div. I, 100 Watt Incandescent Light - Vapor Proof - Bracket Mount - 120 Volts

Made in the USA The EPL-BM-100W-120V Bracket Mount Explosion Proof Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D, and paint spray both approved. Water proof and IP67 rated , this explosion proof incadescent light offered in a suspended mount with 10` galvanized safety cable. The powerful and durable EPL-BM-100W-120V bracket mount explosion proof light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and an effective and durable hazardous location light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with a choice of mounting options and operates on 120VAC @60hz. This hazardous area light carries a T3C temperature rating and is UL Listed Class 1, Groups C and D, Class 2, Groups E and F(T3 rating), and Class III, Groups E, F and G. This light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 3/4" hub. Please specify hub size when ordering. Attached is 10` of 16-3 SOOW cord. The 100 watt incandescent lamp in this unit offers good power and economy and is energized by leads which pass through sealing compound that separates the lamp chamber from the wiring compartment. The lamp assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. Voltages: 120VAC draws 0.04A average. Temp Code: Class 1 T3C 230¡ C - Class2 T3 (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.) Specifications / Additional Information EPL-BM-100W-120V U.L Ratings Lamp Type: Incandescent Class 1, Groups C and D Dimensions: 15"H x 7.25"OD Class II, Groups E and F (T3 Temp Rating) Weight: 9 lbs Class III, Groups E, F and G Voltage: 120V AC 60hz AC, IP67 (water proof) Total Watts: 100 Watts Suitable for Paint Spray Booths Total Lumens: 1050 T3C Temperature Rating Luminous Efficacy: 10.5 Lm/W Lamp Life Expectancy: 1,500 Hrs Color Temp: 2,700K Color Rendering Index: 100 Special Orders- Requirements Lighting Configuration: Steady Burn Contact us for special requirements Temp Rating: T3C Toll Free: 888-325-4448 Mounting: 10` Galvanized Safety Cable Mount Fax: 1-903-498-3364 Wiring: 10` 16/3 SOOW Cable w. Blunt Cut End E-mail: [email protected] Down to Purchase