Larson Electronics C1D2 Bug Eyes Emergency Lighting System - Hazardous Locations - (2) 5W MR16 LEDs - 120/277V

Made in the USA The HAL-EMG-5W-2L-LED Hazardous Area Location Emergency Bug Eyes LED Light with back up emergency battery from Larson Electronics is rated Class 1 Division II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a must. The HAL-EMG-5W-2L-LED is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90+ minutes or until power is restored. Once power is restored, a built in charger will return the unit to a fully charged state within acceptable UL time limits. This hazardous area location emergency lighting fixture carries an integral maintenance-free, sealed, high temperature Nickel-Cadmium battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the LED bulbs for 90+ minutes. The battery is protected from deep discharge by solid state circuitry which senses low voltage and turns off the unit before battery damage can occur. This emergency light is multi-voltage capable and can operate with voltages ranging from 120V to 277V 60HZ. This unit`s housing is constructed of die-cast aluminum and fitted with an impact resistant polycarbonate lens. Mounting brackets and all hardware are stainless steel. The HAL-EMG-5W-2L-LED can withstand temperature variances ranging from 0¡C to +50¡C and its low maintenance design offers up to ten years of operational life. An integrated pilot light indicates the presence of AC current and a test switch allows easy confirmation of proper emergency operation. The HAL-EMG-5W-2L-LED automatically performs one 5-minute monthly. Every 6 months the fixture will perform two 30-minute discharge tests, 24 hours apart. These automaticly test both full battery capaicty and recharge capability. Information is communicated to maintenance personnel via a single multi-color indicator LED. Made in the USA Quality 1. No Maintenance Nickel-Cadmium Battery.2. Fiberglass Reinforced Polyester Construction.3. Universal 120 through 277VAC Operation 4. 90 Minute Battery Backup Runtime.5. Deep Discharge Battery Protection.6. 10 Year Rated Lifespan.7. Fully Automatic Operation.8. Solid State Internal Electronics.9. Pilot Light AC Current Indicator.10. Test Switch for Emergency Operation Confirmation.11. Fully Electronic Circuit Control. Specifications / Additional Information HAL-EMG-5W-2L-LED Ratings Lamp Type: LED Class I, Division 2 Groups A,B,C,D Dimensions: 16.25"-L x 6"-W 7.5"-H Class II, Divisions 1 & 2 Groups E, F, G Watts: 10 T4A Temperature Rating Materials: Die-cast aluminum & polycarbonate lens NEMA 4X / IP66 Voltage: 120/277VAC Sanitation Listed Lighting Configuration: (2) 5 watt MR16 LED Bulbs Listed for United States and Canada Mounting: Wall Mount/Flat Surface Mount Wiring: 1/2" NPT Threaded for Conduit Weight: 19.50 Lbs Battery Backup: High temp Nickel-Cadmium Battery Input Voltage: (Dual) 120/277VAC @ 60Hz Unit Life Expectancy: 10 years Battery Backup Runtime: 90 Minutes Battery Output Voltage: 12 VDC Nominal Special Orders- Requirements Battery Output Current: 1000mA (Constant) Contact us for special requirements Battery Output Power: 12 Watts (Max) Toll Free: 888-325-4448 Battery Operating Temp: 0 - 50C Battery Recharge Time: 24 hours from full discharge E-mail: [email protected] Down to Purchase-