Larson Electronics C1D1 Explosion Proof Panelboard - 208Y/120 3PH - Main Lug Panel w/ 12 Spaces - (6) 3/4" NPT Taps

The EPPB-3P-208Y.120-100ML-1X20A.3P-1X20A.2P-5X20A.1P is an Explosion Proof Panelboard with Class I, II, III and Class I, Zones 1 & 2 combustible ratings. This 100-amp main lug only panelboard is setup for 208Y/120V three-phase primary voltage, with a 3-pole 4-wire configuration. Constructed using copper-free aluminum, the NEMA rated unit is equipped with branch breakers and a total of six, 3/4" NPT taps at the bottom of the panelboard. The EPPB-3P-208Y.120-100ML-1X20A.3P-1X20A.2P-5X20A.1P is suitable for power distribution and circuit protection in flammable environments. This unit features a primary voltage of 208Y/120 three phase and a 100-amp main lug only panel. Taking on a 3-pole 4-wire configuration, the explosion proof panelboard consists of one, 20-amp 3-pole; one, 20-amp, 2-pole; and five, 20-amp 1-pole branch breakers. A total of 12 spaces are available inside the Class I, Division 1 explosion proof panel. This explosion proof panelboard is constructed of copper-free aluminum. The NEMA-rated panelboard is approved with the following explosion proof ratings: Class I, Groups B, C, D; Class I, Zones 1 & 2; Class II, Groups E, F, G; and Class III. This unit can be mounted on flat surfaces during installation. Operators are provided access to six, 3/4" NPT taps at the bottom of the panelboard. Applications: Industrial facilities, hazardous locations, offshore refineries, marine locations, indoor/outdoor spaces, agricultural sites, ship yards, docks and more. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information EPPB-3P-208Y.120-100ML-1X20A.3P-1X20A.2P-5X20A.1P Explosion Proof Panelboard Ratings Type: Explosion Proof Lighting Panelboard Class I Groups B, C, D Primary Voltage: 208Y/120 3PH Class II Groups E, F G Main Panel Amp Rating: 100A MLO Class III Configuration: 3 Pole 4 Wire Class I Zones 1&2, Groups llB+H2, IIA Branches: (1) 20A 3P, (1) 20A 2P, (5) 20A 1P Breakers NEMA 3, 4, 4x, 7 (B, C, D) 9 (E, F, G) Spaces: 12 Materials: Copper Free Aluminum Special Orders- Requirements Finish: Aluminum Lacquer Paint Contact us for special requirements Mount: Surface Toll Free: 888-325-4448 Taps: (6) 3/4" NPT @ Bottom Intl: 1-214-616-6180 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*