Larson Electronics 960W High Intensity Utility Pole Mount LED Light - Day/Night Sensor - IP67 Waterproof - 100ft Cord

Made in the USA The Larson Electronics GAU-UTP-2X500LTL-DNS-480V-100-NP High Intensity Utility Pole Band Mount LED Light provides a safe and effective way for operators to quickly deploy 480 watts of elevated lighting. The two, 480-watt LED lamps produce a wide spread of intense white light, allowing this unit to effectively cover large work areas from utility poles with high quality illumination. The dual LED assembly is mounted on a sturdy utility pole band. This unit comes with a day/night sensor and 100 feet of 16/3 SOOW cable. The GAU-UTP-2X500LTL-DNS-480V-100-NP is designed to quickly and safely deploy 960 watts (225,600 lumens) of intense LED lighting in locations where elevated illumination is needed for maximum area coverage. This unit, which operates on 347-480V, is secured on utility poles via a high-strength band mounting system. Operators may automate illumination using a dusk/dawn photocell sensor located at the top of the assembly. LED Lights: Included with this LED assembly are two of our wet area suitable GAU-LTL-500W-LED high output LED fixtures producing a combined total of approximately 64,800 lumens at 480 watts. A day/night sensor is available for automatic detection of lighting needs in the area. Each light head contains forty-eight CREE¨ high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24¡ wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10¡ spot, 38¡ narrow flood, 60¡ flood, and 90¡ wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. Alternative customer configurations are available upon request, including alternating beam configuration fixtures. Please contact us for special requirements. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. Durability: As well as unparalleled heat control, the GAU-LTL-500W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to +80¡ Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE¨ LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. Technology: The LED light heads on this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. Unlike some LED manufacturers where an LED failure in the circuit will cause the entire circuit to cease operator, each light emitting diode in these light fixtures will operate independently and are not affected by the operate of neighboring diodes. In the event of an individual LED failure, the mating LEDs will continue to operate. Optional Finish Glossy Blue Powder Coat Galvanized Wiring/Mounting/Finish: The dual LED light heads are supported by a utility pole band mounting system. A heavy-duty band supports the luminaries in an upright position. The photo cell is located above the dual light heads for full exposure to the surrounding environment. For connection to a 347-480V power source, a 100` 16/3 SOOW cable with blunt cut end is provided with this unit. The LED light assembly comes in either galvanized or powder coated finish for robust durability in outdoor sites. Suggested Applications: Temporary lighting, utility poles, general locations, wide area lighting, elevated lighting systems, maintenance/repair operations and more. We can equip this unit with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E , LEDLB-160X2E or LEDLB-80x2E . At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information GAU-UTP-2X500LTL-DNS-480V-100-NP Utility Pole Band Mount LED Light Quick Summary Lamp Type: LED IP67 Waterproof Dimensions: - PMMA High Transmittance Optics Weight: 120 lbs 80,000+ Lamp Life Voltage: 347-480V AC Multiple LED Banks for Heat Dispersion Total Watts: 960 Watts, (2) 480 Watt LED Fixtures Dusk to Dawn Photocell Total Lumens: 64,800 Ambient Op Temp -40C to +80C Luminous Efficiency: 135 lm/w Color Temp: Cool White - 5500-6500K Lighting Configuration: 10¡ Spot, 24¡ Wide Spot, 38¡ Narrow Flood, 60¡ Flood, or 90¡ Wide Flood Lamp Adjustment: Vertical and Horizontal Positioning Optics Efficiency: 98% - PMMA High Transmittance Optics Lamp Life: 80,000+ Hours Special Orders- Requirements Materials: Die Cast Aluminum Housing, PMMA Optics Contact us for special requirements Finish: Galvanized or Powder Coated Phone: 1-214-616-6180 Mounting: Utility Pole Band Mount Toll Free: 888-325-4448 Cable: 100` 16/3 SOOW Cord w/ Blunt Cut End Fax: 1-903-498-3364 Warranty: Yes - 3 Years E-mail: [email protected] 3 year warranty replacement on this light assembly. The customer ships the failed light assembly to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit. Scroll Down to Purchase-