Larson Electronics 90 Watt Traditional LED Wall Washer - Replaces 400 Watt Metal Halide Fixtures - 120-277V AC - IP65

The LEDHWW-900 Traditional Style LED Wall Washer offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 90 watt LED light is designed to replace 400 watt metal halide wall washers and produces a wide forward throw flood beam without the high heat, fragile construction, or high energy costs of traditional lighting. The LED LEDHWW-900 provides 100,000 hours of reliability and up to 87% savings compared to traditional 400 watt metal halide wall pack fixtures. The popular LEDHWW-900 traditional style LED wall washer from Larson Electronics is designed to replace more fragile and energy consuming 400 watt metal halide fixtures, without the required maintenance or electrical requirements associated with metal halides. This 90 watt LED wall washer assembly consists of an integrated LED assembly paired with a glass lens to produce a wide light distribution suitable for replacing 400 watt metal halide flood lights. This LED wall mount wall pack features a 2-piece hinged housing constructed of heavy duty die cast aluminum alloy with an injected molded rubber gasket resembling that of traditional style wall washer fixtures. This LED wall washer is designed to withstand demanding conditions and is IP65 waterproof and built to resist the damaging effects of an outdoor environment. This fixture can be used indoors or outdoors as well as in confined spaces without heat buildup. The LEDHWW-900 consists of an integrated LED assembly housed within a heavy duty waterproof die cast aluminum frame that is powder coated for added durability and resistance to corrosion. The 2-part hinged housing allows for easy wall mount installation and future servicing, and the aluminum design helps heat dissipation and increased LED longevity. The LED lamp assembly is protected by a prismatic glass lens which is secured to the housing with a one piece injected rubber seal. This prismatic glass lens is designed for superior light distribution. Four 1/2" NPT knockouts located on three sides and back provide a secure and sealed power or photocell connection point and rounds out this unit`s weather resistant construction. The traditional full cutoff front frame design of this LED wall washer helps maintain building aesthetics when replacing existing wall pack lighting. Click Photo to Enlarge Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Metal Halide LED Savings Wattage 460* watts 90 watts -370 watts Amp Draw @ 120V AC 3.84 amps 0.75 amps -3.09 amps Amp Draw @ 220V AC 2.10 amps 0.41 amps -1.69 amps Amp Draw @ 240V AC 1.92 amps 0.37 amps -1.55 amps Amp Draw @ 277V AC 1.66 amps 0.33 amps -1.36 amps Lamp Life Expectancy 20,000 hours 100,000 hours +80,000 hours Operation cost per year - each(12hs/day @ 12c/kWh) $241.78 $47.30 $194.48/yr Operation cost per year -50 fixtures(12hs/day @ 12c/kWh) $12,089.00 $2,365.00 $9724.00/yr *Includes ballast factor LED has no ballast 80% in energy savings alone, before cost of maintenance for metal halide fixtures.Up to 87% annual savings possible by switching to LED. This LED wall washer is universal voltage, not multi-tap, and can be operated on a range of voltages from 100 volts to 277 volts AC 50/60Hz providing versatile power options for all locations. The LEDHWW-900 provides an efficient and highly durable alternative to standard 400 watt metal halide as well as halogen, fluorescent, and compact fluorescent wall pack lights while using only a fraction of the power. With the LEDHWW-900 there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 100,000 hours of operation. The LEDHWW-900 is ideal for wall pack lighting, wall pack down lighting, wall wash lighting, upwards lighting, monuments, walkways, loading docks, warehouses, commercial buildings, parking lots, carports, underpasses, driveways, hotels, garages, commercial buildings, schools, hospitals, public areas, and security systems just to name a few examples. Specifications / Additional Information LEDHWW-900 Wall Pack Light Quick Summary / Features Listing: United States - Canada Listed for United States and Canada Lamp Type: LED Waterproof Dimensions (Inches):14.1"-L x 9.4"-W x 11.61"-H Operates on Standard 110-277 VAC Dimensions (CM): 36-L x 24-W x 29.5-H Vibration Resistant Construction Weight: 9.7 Lbs. 100,000 Hour LED Life Voltage: 110-277 Volts AC 50/60hz IP65 Waterproof Watts: 90 Approved for Confined Spares Total Lumens: 8,100 Approved for Indoor Use Luminous Efficacy: 90 lm/w Approved for Outdoor Use LED Life Expectancy: 100,000 hours Approved for Wet Locations Lighting Configuration: Flood Ambient Temp Range -40¡C to +60¡ LED Light Color: 2700K, 4500K, or 5600K High Performance Integrated LED Assembly Color Rendering Index: >75 Replaces 400 Watt Metal Halide Light Fixtures Power Efficiency: 85% Up to 87% Savings in Energy and Maintenance Power Factor: >0.95 Traditional Housing Matches Existing Fixtures Amp Draw: 0.75A @ 120V, 0.375 @ 240V, 0.33 @ 277V Housing Materials: Die Cast Aluminum Alloy 2-Part Hinged Housing Housing Color: Brown, Black, White Lens Materials: Prismatic Glass Lens Gasket Materials: Injection Molded Rubber Ingress Protection: IP65 Ambient Temp Range: -40¡C to +60¡C Special Orders- Requirements Mounting: Wall / Flat Surface Contact us for special requirements Wiring: Pigtail Toll Free: 1-800-369-6671 Wiring Hub: 1/2" NPT Knock-outs Warranty: 5 Years* E-mail:[email protected] Scroll Down to Purchase-