Larson Electronics 90 Watt Traditional LED Wall Washer - Emergency Battery Backup - Replaces 400 Watt MH Fixture

The LEDHWW-EMG-900 from Larson Electronics is a Traditional Historic Style LED Wall Washer with Emergency Battery Backup that offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 90 watt LED light is designed to replace 400 watt metal halide wall washers and produces a wide forward throw flood beam without the high heat, fragile construction, or high energy costs of traditional lighting. The LED LEDHWW-EMG-900 provides 100,000 hours of reliability and up to 87% savings compared to traditional 400 watt metal halide wall pack fixtures. In the event of a power failure or power outage, this LED wall washer fixture will operate for a minimum of 90 minutes at 50% lumen output due to the included emergency battery backup.The popular LEDHWW-EMG-900 traditional style LED wall washer with emergency battery backup from Larson Electronics is designed to replace more fragile and energy consuming 400 watt metal halide fixtures, without the required maintenance or electrical requirements associated with metal halides. This 90 watt LED wall washer assembly consists of an integrated LED assembly paired with a glass lens to produce a wide light distribution suitable for replacing 400 watt metal halide flood lights. This LED wall mount wall pack features a 2-piece hinged housing constructed of heavy duty die cast aluminum alloy with an injected molded rubber gasket resembling that of traditional style wall washer fixtures. This LED wall washer is designed to withstand demanding conditions and is IP65 waterproof and built to resist the damaging effects of an outdoor environment. This fixture can be used indoors or outdoors as well as in confined spaces without heat buildup. The LEDHWW-EMG-900 consists of an integrated LED assembly housed within a heavy duty waterproof die cast aluminum frame that is powder coated for added durability and resistance to corrosion. The 2-part hinged housing allows for easy wall mount installation and future servicing, and the aluminum design helps heat dissipation and increased LED longevity. The LED lamp assembly is protected by a prismatic glass lens which is secured to the housing with a one piece injected rubber seal. This prismatic glass lens is designed for superior light distribution. Four 1/2" NPT knockouts located on three sides and back provide a secure and sealed power or photocell connection point and rounds out this unit`s weather resistant construction. The traditional full cutoff front frame design of this LED wall washer helps maintain building aesthetics when replacing existing wall pack lighting. Click Photo to Enlarge LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Metal HalideLEDSavings Wattage460* watts90 watts-370 watts Amp Draw @ 120V AC3.84 amps0.75 amps-3.09 amps Amp Draw @ 220V AC2.10 amps0.41 amps-1.69 amps Amp Draw @ 240V AC1.92 amps0.37 amps-1.55 amps Amp Draw @ 277V AC1.66 amps0.33 amps-1.36 amps Lamp Life Expectancy20,000 hours100,000 hours+80,000 hours Operation cost per year - each(12hs/day @ 12c/kWh)$241.78$47.30$194.48/yr Operation cost per year -50 fixtures(12hs/day @ 12c/kWh)$12,089.00$2,365.00$9724.00/yr *Includes ballast factorLED has no ballast 80% in energy savings alone, before cost of maintenance for metal halide fixtures.Up to 87% annual savings possible by switching to LED. This emergency LED light works, mounts and is wired like our LEDHWW-EMG-900 LED light fixtures. The main difference is that we add a remote mounted battery backup unit that adds emergency light functionality to the fixture. This emergency LED light will run at the standard UL suggested 90 minutes after power is lost at 2,625 lumens. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency battery backup that is automatically recharged and kept in a ready state.This LED wall washer is universal voltage, not multi-tap, and can be operated on a range of voltages from 100 volts to 277 volts AC 50/60Hz providing versatile power options for all locations. The LEDHWW-EMG-900 provides an efficient and highly durable alternative to standard 400 watt metal halide as well as halogen, fluorescent, and compact fluorescent wall pack lights while using only a fraction of the power.With the LEDHWW-EMG-900 there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 100,000 hours of operation. The LEDHWW-EMG-900 is ideal for wall pack lighting, wall pack down lighting, wall wash lighting, upwards lighting, monuments, walkways, loading docks, warehouses, commercial buildings, parking lots, carports, underpasses, driveways, hotels, garages, commercial buildings, schools, hospitals, public areas, and security systems just to name a few examples.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDHWW-EMG-900 Wall Pack Light w/ Emergency Battery BackupQuick Summary / Features Listing: United States - CanadaListed for United States and Canada Lamp Type: LEDWaterproof Dimensions (Inches): 14.1"L x 9.4"W x 11.61"HOperates on Standard 110-277 VAC Dimensions (CM): 36L x 24W x 29.5HVibration Resistant ConstructionWeight: 9.7lLbs100,000 Hour LED Life Voltage: 110-277 Volts AC, 50/60hzIP65 Waterproof Watts: 90Approved for Confined SparesTotal Lumens: 8,100Approved for Indoor Use Luminous Efficacy: 90 Lm/WApproved for Outdoor Use LED Life Expectancy: 100,000 HoursApproved for Wet Locations Lighting Configuration: Flood Ambient Temp Range -40¡C to +60¡C LED Light Color: 5600K, 4500K or 2700KHigh Performance Integrated LED Assembly Color Rendering Index: >75Replaces 400 Watt Metal Halide Light Fixtures Power Efficiency: 85%Up to 87% Savings in Energy and Maintenance Power Factor: >0.95Traditional Housing Matches Existing FixturesAmp Draw: 0.75A @ 120V, 0.375 @ 240V, 0.33 @ 277VEmergency Battery Backup with 90 Minute Runtime Emergency Runtime: 90 Minutes Emergency Lumens: 4,050 Lumens Housing Materials: Die Cast Aluminum Alloy 2-Part Hinged Housing Housing Color: Brown, Black or White Lens Materials: Prismatic Glass LensGasket Materials: Injection Molded Rubber Ingress Protection: IP65 Ambient Temp Range: -40¡C to +60¡CSpecial Orders- Requirements Mounting: Wall / Flat SurfaceContact us for special requirements Wiring: PigtailToll Free: 1-800-369-6671 Wiring Hub: 1/2" NPT Knock-outsIntl: 1-903-270-1187 Warranty: 5 Years*E-mail:[email protected] Scroll Down to Purchase-