Larson Electronics 90 Watt Traditional LED Wall Pack - Motion + Day/Night Sensor - IP65 Rated

The LEDHWP-900-DNMS Traditional Style LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 90 watt LED light is designed to replace 400 watt metal halide wall packs and produces a wide flood beam without the high heat, fragile construction, or high energy costs of traditional lighting. The LED LEDHWP-900-DNMS provides 100,000 hours of reliability and up to 87% savings compared to traditional 400 watt metal halide wall pack fixtures. The popular LEDHWP-900-DNMS traditional style LED wall pack light from Larson Electronics is designed to replace more fragile and energy consuming 400 watt metal halide fixtures, without the required maintenance or electrical requirements associated with metal halides. This 90 watt LED wall pack assembly consists of an integrated LED assembly paired with prismatic glass to produce a wide light distribution suitable for replacing 400 watt metal halide flood lights. This LED wall pack features a 2-piece hinged housing constructed of die cast aluminum alloy with an injected molded rubber gasket resembling that of traditional style wall pack fixtures. This LED wall pack is designed to withstand demanding conditions and is IP65 waterproof and built to resist the damaging effects of an outdoor environment. This fixture can be used indoors or outdoors as well as in confined spaces without heat buildup. An integrated motion + day/night sensor only adds to the efficiency of this LED wall pack light. Click Photo to Enlarge Click Photo to Enlarge The LEDHWP-900-DNMS consists of an integrated LED assembly housed within a waterproof die cast aluminum housing that is powder coated for added durability and resistance to corrosion. The 2-part hinged housing allows for easy wall mount installation and future servicing, and the aluminum design helps heat dissipation and increased LED longevity. The LED lamp assembly is protected by a prismatic glass lens which is secured to the housing with a one piece injected rubber seal. This prismatic glass lens is designed for superior light distribution. A 1/2" NPT knockout provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. The traditional housing design of this LED wall pack helps maintain building aesthetics when replacing existing wall packs. LED Technology: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Metal Halide LED Savings Wattage 460* watts 90 watts -370 watts Amp Draw @ 120V AC 3.84 amps 0.97 amps -3.09 amps Amp Draw @ 220V AC 2.10 amps 0.41 amps -1.69 amps Amp Draw @ 240V AC 1.92 amps 0.37 amps -1.55 amps Amp Draw @ 277V AC 1.66 amps 0.33 amps -1.36 amps Lamp Life Expectancy 20,000 hours 100,000 hours +80,000 hours Operation cost per year - each(12hs/day @ 12c/kWh) $241.78 $47.30 $194.48/yr Operation cost per year -50 fixtures(12hs/day @ 12c/kWh) $12,089.00 $2,365.00 $9724.00/yr *Includes ballast factor LED has no ballast 80% in energy savings alone, before cost of maintenance for metal halide fixtures.Up to 87% annual savings possible by switching to LED. Sensor Technology: The LEDHWP-900-DNMS is equipped with an innovative and powerful day/night + motion sensor. This sensor, which is located inside the light fixture itself, allows the LEDHWP-900-DNMS to operate in one of several different and versatile modes. This LED light fixture can be set to be motion activated, day/night activated or in a combination of motion sensing and day/night modes. This high-tech sensor is also highly adjustable and allows operators to modify the following settings: motion sensor sensitivity, motion sensor time-delay and the intensity output level of the fixture. Having this degree of flexibility in operation and settings offers operators an incredibly versatile light fixture. Sensor Versatility: The impressive versatility of the motion + day/night sensor found in the LEDHWP-900-DNMS LED light fixture allows for a lot of creativity in the setup of a single one of these light fixtures. However, the versatility is further increased when multiple units are to be installed together such as in a parking garage or other similar structure. Operators can take advantage of the sensor versatility to set up an energy efficient and automated lighting setup. Take a parking garage for example. Operators would be able to set up a sequence of LEDHWP-900-DNMS fixtures with alternating lights on separate circuits. The first circuit would have sensors set to a lower lux level than the fixtures on the second circuit. This hypothetical setup would allow half the lights to come on as daylight began to fade and the rest of the lights would only come on once complete darkness had fallen. The fixtures could then be adjusted for motion sensing which would allow selected fixtures to power on when pedestrian or vehicle movement was detected and then turn off after an operator chosen interval to conserve energy. This is just one example of the flexibility and versatility that can be achieved with the LEDHWP-900-DNMS. This LED wall pack is universal voltage, not multi-tap, and can be operated on a range of voltages from 100 volts to 277 volts AC 50/ 60Hz providing versatile power options for all locations. The LEDHWP-900-DNMS provides an efficient and highly durable alternative to standard 400 watt metal halide as well as halogen, fluorescent, and compact fluorescent wall pack lights while using only a fraction of the power. With the LEDHWP-900-DNMS there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 100,000 hours of operation. The LEDHWP-900-DNMS is ideal for wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, carports, loading areas, driveways, hotels, garages, commercial buildings, schools, public areas, and security systems just to name a few examples. Specifications / Additional Information LEDHWP-900-DNMS Wall Pack Light Quick Summary / Features Listing: United States - Canada Listed for United States and Canada Lamp Type: LED UL 1598A Dimensions (Inches): 14.18"-L x 9.45"-W x 7.88"-H CSA C22.2 No. 250 Dimensions (CM): 26-L x 24-W x 20-H Waterproof Proof Weight: 10.15 Lbs. Operates on Standard 110-277 VAC Voltage:110-277 Volts AC 50/60Hz Vibration Resistant Construction Watts: 90 100,000 Hour LED Life Total Lumens: 8,100 IP65 Waterproof Luminous Efficacy: 90 lm/w Approved for Confined Spares LED Life Expectancy: 100,000 hours Approved for Indoor Use Lighting Configuration: Flood Approved for Outdoor Use LED Light Color: 2700K, 4500K, or 5600K Approved for Wet Locations Color Rendering Index: >75 Ambient Temp Range -40¡C to +60¡ Power Efficiency: 85% High Performance Integrated LED Assembly Power Factor: >0.95 Replaces 400 Watt Metal Halide Light Fixtures Amp Draw: 0.75A @ 120V, 0.375 @ 240V, 0.33 @ 277V Up to 87% Savings in Energy and Maintenance Housing Materials: Die Cast Aluminum Alloy 2-Part Hinged Housing Traditional Housing Matches Existing Fixtures Lens Materials: Prismatic Glass Lens Gasket Materials: Injection Molded Rubber Ingress Protection: IP65 Ambient Temp Range: -40¡C to +60¡C Special Orders- Requirements Mounting: Wall / Flat Surface Contact us for special requirements Wiring: Pigtail Toll Free: 1-800-369-6671 Wiring Hub: 1/2" NPT Knock-outs Intl: 1-903-270-1187 Warranty: 5 Years* E-mail: [email protected] Scroll Down to Purchase-