Larson Electronics 75W Hazardous Location Colored LED Indicator Light - C1D2/C2D2 - Red, Blue, Green, Amber, White - Black Base/Body, No Back Plate HAL-TL-MJ-5X-C-BLK-SFC-M1-RBGAW

The HAL-TL-MJ-5X-C-BLK-SFC-M1-RBGAW from Larson Electronics is a Hazardous Location Colored LED Indicator Light that provides operators with a powerful alternative to traditional hazardous location luminaries, including metal halide, high pressure sodium, mercury vapor, halogen, CFL and incandescent lamps. This 75-watt unit features red, blue, green, amber and white LED lights. Equipped with a black base and black body, the fixture ships unassembled and must be assembled on site.

The HAL-TL-MJ-5X-C-BLK-SFC-M1-RBGAW is a Class I, Division 2 and Class II, Division 2 hazardous location light fixture that is designed for energy efficient and superior illumination in combustible environments. This 75-watt system features a total of five, 15-watt mason jar style indicator fixtures. Each LED light offers 2,250 lumens of high quality output. Light colors include (in order): red, blue, green, amber and white. The LED indicator light is offered in a strobe or steady burn light configuration. There are 4" nipples between the LED lights.

This system does not have a back plate. The LED unit features a pyramid configuration to ensure complete light distribution that closely represents light output of traditional bulbs (unlike other LED lights that utilize a flat board causing light to be pushed directly downwards). This solution promotes vertical lighting and reduces the limitations associated with directional lighting. We can add a metal reflector at an additional cost.

This lighting solution for explosive sites is IP67 rated, dust-proof and protected against high pressure jets and temporary submersion. The non-sparking housing has a black body and black base. The housing is specially designed to dissipate heat, which increases the efficiency and lifespan of the LEDs and electronic components. This compact fixture is a suitable replacement for metal halide, high pressure sodium, mercury vapor, halogen, CFL and incandescent lights.

LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.

LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.

LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the HAL-TL-MJ-5X-C-BLK-SFC-M1-RBGAW to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.

Field Serviceability: This hazardous location LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most hazardous location fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-MJ series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.

Function: The HAL-TL-MJ-5X-C-BLK-SFC-M1-RBGAW is an indicator lighting system intended for use with warning systems as opposed to standard illumination applications. In other words, when this light comes on in the field, it means that something is wrong or needs attention. This unit`s black housing helps it stand out as a warning light amongst other standard illumination fixtures. This indicator light is compatible with emergency battery backup systems (not included).

Voltage: The light is universal voltage capable and can be operated with 120-277V AC or 12-24V AC/DC.

Mount: This hazardous location LED light fixture is compatible with surface mounting installations.

Suggested Applications: Hazardous locations, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants and more.