Larson Electronics 75KVA Portable Temporary Distribution Stepdown Transformer - 480V to 240/208-120V - (2) 60A 460R9W

Made in Texas The MPD-480.3P-75KVA-240.208.120-2X60A portable power distribution system is designed to enable operators to connect to 480V three phase primary voltage and step it down to 240/208-120V three phase to operate lights and equipment. Operators can connect to 480V power sources using the 20` of included #3 Type SOOW cable on the input side. On the secondary side, operators can connect up to two 240V, 60-amp devices. This versatile system enables operators to make the most of a single 480V 3-phase connection via the included line-in cord. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Operation: The included 20` #3 Type SOOW line-in cord brings 480V three phase power to the NEMA 3R 100-amp primary disconnect. This primary disconnect contains three 100-amp time delay fuses breakers protecting the transformer. The NEMA 3R transformer steps down 480V three phase power to 240/208-120V three phase and passes the current to the secondary side. The secondary side of the transformer features two watertight IEC 60309 460R9W pin and sleeve receptacles that allow operators to connect 240V, 60-amp devices. All receptacles are equipped with waterproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer`s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480.3P-75KVA-240.208.120-2X60A Power Distribution System Ratings Line-In Cord: 20` #3 Type SOOW UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V 3P NEMA 3R Indoor or Outdoor Use Secondary Panel: 240/208-120V 3P N3R 150A Made in the USA Primary Disconnect Fuses: (3) 100 Amp Time Delay Fuses Secondary Panel Outlets: (2) Watertight IEC 60309 460R9W Pin and Sleeve Receptacles w/ Weatherproof Covers Transformer: 75KVA 480V-3P to 240/208-120V-3P N3R Secondary Voltage: 240/208-120V 3P Secondary Panel Breakers: (1) 150 Amp Main Breaker; (2) 60 Amp Secondary Breakers Frame Material: Carbon Steel Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 8” casters Dimensions: 34"-L X 40"-W X 58"-H Weight: 600lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 100A @ 480V 3P Toll Free: 888-325-4448 Max Secondary OCP: 150A @ 240/208-120V 3P E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase