Larson Electronics 75KVA Temporary Power Distribution Panel - 480V to 208Y/120V 3PH - 200A MCB Secondary

Made in the USA The Larson Electronics MPD-480-3P-75KVA-208Y.120-200AB heavy duty power transformer substation converts 480V AC electrical current to 208Y/120V AC three phase. This unit provides operators the ability to safely tap into and distribute 120V AC and 208V AC power from a variety of sources including generators and direct grid power. This model is designed to support both linear (motor) and non-linear loads (lighting, computers, etc.). For that reason, we deliver 120V and 208V WYE on the secondary and provide a neutral. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics MPD-480-3P-75KVA-208Y.120-200AB transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. On the primary side, operators connect three-phase 480V line-in power via 20` of #4 Type W Cord. On the secondary side, operators are provided access to a 200-amp main circuit breaker. Operation: A 20` #4 Type W cable brings 480V three phase power to the 100-amp, 480V, 3-phase fused disconnect, which contains three 100-amp time delay fuses protecting the 75KVA transformer. The NEMA 3R transformer converts 480V to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 200-amp main circuit breaker panel. This secondary panel is protected by a 200-amp main breaker. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480-3P-75KVA-208Y.120-200AB Power Distribution System Ratings Line-In Cord: 20` #4 Type W Cable Max Primary/PDU OCP: 100A @ 480V Primary Voltage: 480V AC 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 480V 3PH 100A N3R Fused @ 100A NEMA 3R Indoor or Outdoor Use Primary Protection: Time Delay Fuses Made in the USA Transformer: 75KVA 480V to 208Y/120V AC 3PH N3R Secondary Voltage: 208Y/120VAC 3PH Secondary Panel: 208Y/120V 3PH 200A MCB N3R Secondary Breakers: (1) 200A Special Orders- Requirements Secondary Receptacles:- Contact us for special requirements Secondary Protection: - Toll Free: 888-325-4448 Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 8” casters Dimensions: 34”-L X 40”-W X 58”-H E-mail: [email protected] Weight: 600 lbs Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase