Larson Electronics 750 kVA Pad Mount Transformer - 12470GRDY/7200 Grounded Wye Primary - 480Y/277 Secondary- Oil Cooled

The MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R 12470GRDY/7200 3 Phase Energy Efficient Dead Front Loop Feed Pad Mount Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 750 kVA, the MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R dead front loop feed transformer is a three phase unit with a primary voltage of 12470GRDY/7200 Grounded Wye. It also provides a secondary voltage of 480Y/277 V Wye. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. The MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R is a grounded wye connection transformer and therefore must be connected phase-to-ground on a grounded wye system. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be pad mounted. The unit also features mineral oil cooling, a 65¡C temperature rise and is rated IP24. The MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R is designed so that no excess oil heating occurs from unbalanced loads or phase loss on the primary side. Benefits: The MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R dead front loop feed pad mount transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-PML-3P-12470GRDY.7200-750KVA-480Y.277-N3R Pad Mount Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 60 Hz ONAN Cooling Class kVA: 750 IP24 Rated Primary Voltages: 12470GRDY/7200 V Grounded Wye Mineral Oil Filled Primary Connection: Grounded Wye Dead Front Taps: None Loop Feed Secondary Voltage: 480Y/277 V Wye Secondary Connection: Wye Primary Bushings: (6) Universal Bushing Wells Secondary Bushings: Four-Hole Spade Bushings Fusing: Flapper Valve Bay-O-Net Fuses Accessories: Liquid Level Gauge Accessories: Dial Type Thermometer Accessories: Pressure Vacuum Gauge Accessories: Pressure Relief Diaphragm Accessories: Internal Fault Detector Accessories: 1" Drain Valve w/ Sampler Labels: Internal & External "No PCBs" Labels High Voltage Switch: 200 Amp Internal, Oil Immersed, 3-Phase, Gang Operated, T-Blade, 4 Position Load Break Switch Winding Material: Aluminum Efficiency: DOE Compliant Cooling Class: ONAN Insulating Fluid: Mineral Oil Elevation: Designed for Operation at 1000M (3300`) Above Sea Level Temperature Rise: 65¡C Nominal Impedance: Standard Sound Level: NEMA TR1 Standard Nameplate: EPS Standard Tank Material: Mild Steel Special Orders- Requirements Finish: Munsell 7.0 GY 3.29/1.5 Bell Green Contact us for special requirements Dimensions: - Toll Free: 888-325-4448 Weight: - Intl: 1-214-616-6180 Mounting: Pad Mount E-mail: [email protected] -Scroll Down to Purchase-