Larson Electronics 75 KVA Power Distribution System - 480V to 120/240V 1PH - (6) 50' SOOW Whips w/ CS6364C Connectors

Made in Texas The Larson Electronics MPD-480V-75KVA-300MB-120.240-6X50A.50FT temporary power distribution system converts 480V AC three phase current to 120/240V single phase. This power distribution system provides operators the ability to safely tap into and distribute 480V power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MPD-480V-75KVA-300MB-120.240-6X50A.50FT portable power distribution system gives operators the ability to power their 120/240V single phase equipment from a single system. On the primary side, operators connect 480 volt three phase using a customer provided cord. On the secondary side, operators connect to six CS6364C twist-lock connectors with 50` SOOW whips for 120/240V single phase equipment. Operation: A customer provided cord brings 480V three phase power to the NEMA 3R 200-amp primary disconnect and passes 480V single phase through to the transformer. The NEMA 3R 75 KVA transformer converts 480V single phase power to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 300-amp, 120/240V main breaker panel, which contains six 50-amp breakers protecting six CS6364C 120/240V twist-lock connectors with 50` SOOW whips. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 orinfo@lightingandsupplies.com to discuss your specific requirements. Specifications / Additional Information MPD-480V-75KVA-300MB-120.240-6X50A.50FT -Temporary Power Distribution System Ratings Line In: Customer Provided Max OCP Primary: 200A @ 480V Line-In Cord Cap: Customer Provided Max OCP Secondary: 300A @ 240V Primary Voltage: 480V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 200A Fused @ 200A NEMA 3R Indoor / Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect Transformer: 75KVA 480V to 120/240V 1PH N3R Secondary Voltage: 120/240V 1PH Secondary Disconnect: - Secondary Panel: 120/240V 300A Main Breaker Panel N3R Secondary Breakers: (6) 50A Special Orders- Requirements Secondary Connectors: (6) CS6364C Twist-lock Connectors w/ 50` SOOW Whips [120/240V] Contact us for special requirements Secondary Protection: - Toll Free: 888-325-4448 Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Dimensions: W-40" X D-40" X H-48" E-mail: info@lightingandsupplies.com Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase