Larson Electronics 10 KVA Power Distribution System - 480V to 120/240V 1PH - Manual Transfer Switch

Made in the USA The Larson Electronics MGS-480.3P-MTS-200AMB-10KVA-120.240-100AMB-MOD9675 power distribution substation converts 480V AC three phase electrical current into single phase 120/240V. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. The MGS-480.3P-MTS-200AMB-10KVA-120.240-100AMB-MOD9675 transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. This unit is designed to operate with 480V three phase which it then transforms to 120/240V single phase. Operation: Operators bring in 480V three phase via line power or backup power. A selection must be made on the 200-amp, 480V three phase manual transfer switch, in order to choose the preferred input. When selecting line power as the input, power first passes through a 200-amp, 480V three phase meter. After 480V three phase power is brought in via one of the selected inputs, power is passed to a 200-amp, 480V three phase main circuit breaker panel on the primary side. The panel then passes 480V single phase to the 10 KVA transformer, which converts 480V to 120/240V single phase and passes power to the secondary side of the unit. This secondary side consists of a 100-amp 120/240V single phase main lug only panel. A total of eight breakers are available for operators to complete power connections. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Units are available up to 150kva and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information MGS-480.3P-MTS-200AMB-10KVA-120.240-100AMB-MOD9675 Power Transformer Ratings Line In: - UL 1640 Portable Power-Distribution Equipment Meter: 200A 480V 3PH (Line Power) NEMA 3R Indoor or Outdoor Use Manual Transfer Switch: 200A 480V 3PH (Backup Power) Made in the USA Primary Voltage: 480V 3PH Primary Panel: 200A 480V 3PH Main Circuit Breaker Panel N3R Transformer: 10 KVA 480V to 120/240V 1PH N3R Secondary Voltage: 120/240V 1PH Secondary Panel: 100A 120/240V 1PH Main Lug Only Panel N3R Secondary Breakers: (8) 20A Mounting: Carbon Steel Tubular Frame, Powder Coated with locking casters Dimensions: 36"W X 30"D X 56"H Weight: ~400lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 200A @ 480V Toll Free: 888-325-4448 Max Secondary OCP: 100A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase