Larson Electronics 70W Explosion Proof LED Light w/ Magnet Mount - Aluminum Base - Inline Switch - 5800 Lumens - C1D1&2

The EPL-BS-70LED-XMB-100 from Larson Electronics is a Portaable Explosion Proof Magnetic Mount LED Light that is rated for use in Class I Divisions 1 and 2 Groups C & D and Class II Divisions 1 and 2 hazardous areas and produces 5,800 lumens of light while drawing only 70 watts. The EPL-BS-70LED-XMB-100 features a magnetic mounting bracket that holds the light to magnetic surfaces through the carryhing handle. The mounting bracket features four 200 lb magnets for a total grip strength 800 lbs. The EPL-BS-70LED-XMB-100 explosion proof magnetic mount LED light provides 4,500 square feet of work area coverage with 5,800 lumens of light output. It is available in 360¡ and 180¡ beam spreads. This portable LED light is mounted to a handheld aluminum frame with an explosion proof on/off switch on the back of the frame. The EPL-BS-70LED-XMB-100 also features a magnetic mounting bracket that is equipped with four evenly spaces 200 lb grip magnets. This gives the light fixture 800 lbs of grip force that provides secure mounting to flat, magnetic surfaces. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This explosion proof magnetic LED light fixture is comprised of a 70 watt LED light head mounted atop a base stand fabricated from non sparking spun aluminum with a convenient carrying handle built into the top of the stand. The aluminum frame features an explosion proof switch built into the cord wrap on the back of the unit. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring & Plug: This explosion proof magnetic mount LED light is equipped with 100 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur. This unit is also universal voltage capable and can be configured to operate on 120-277V AC, 50/60 Hz. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. Note on Beam Spread: The 360¡ beam spread is the standard directional output and typical for flood lights. The 180¡ shines in only one direction. This is good for down lighting, wall packs and for not blinding oncoming traffic or pedestrians. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-BS-70LED-XMB-100 Explosion Proof Magnetic LED Light Quick Summary UL Listing: United States Class I Divisions 1 & 2, Groups C & D Dimensions: 15.25"H x 10.5"W x 9.25"D Class II, Divisions 1 & 2, Groups E, F & G Weight: 35 Lbs UL Certified U.S. Standards Total Watts: 70 watts Choice of Explosion Proof Cord Cap Voltage: 120-277V AC, 50/60Hz LED Lamp Lumens: 5,800 LED Lamp Life Expectancy: 60,000 Hours Mounting: Magnetic Mounting Bracket - (4) 200 lb Magnets Wiring: 100` 16/3 SOOW w/ Explosion Proof Cord Cap Cord Cap Options: 5-15P, 5-20P or 6-20P Special Orders- Requirements Operating Temp Range: T5 Rated -40¡C to 65¡C Contact us for special requirements Color Temp: 6000K Toll Free: 888-325-4448 LED Lamp Life Expectancy: 100,000 Hours Beam Spread: 360¡ or 180¡ E-mail: [email protected] Scroll Down to Purchase-