Larson Electronics 7.5 kVA Power Distribution Center - Secondary and outlets - 480V 3P Primary - 8 X 120V Secondary

Made in the USA SECONDARY AND OUTLETS ONLY *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics MGS-7.5KVA-8O-B heavy duty power transformer substation converts 480 VAC three phase electrical current to single phase 120V AC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. The MGS-7.5KVA-8O-B transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This unit is designed to operate with 480 VAC which it then steps down to 120VAC. This transformer makes 120VAC available via 8 GFCI protected receptacles. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The MGS-7.5KVA-8O-B converts 480 VAC three phase to single phase 120V AC. Protection is provided through the use of 8 GFCI protected outlets and integral breaker boxes on both input and line outs. 20` of Line Power SO Cord connects to a fused 30 amp ON/OFF disconnect switch which controls power to the 7.5 KVA, 480 Volt Transformer. The transformer is mounted to a 1/8" thick diamond plate and the distribution assembly is mounted onto a rugged 2" square carbon steel frame with a top located lifting eyelet to allow easy transport. This unit is weatherproof and ideal for use in applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows and exhibits and marine applications. These units are popularly used in hazardous locations where external power sources are often necessary and work well in combination with explosion proof lights. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information MGS-7.5KVA-8O-B Secondary and Outlets Ratings Line In: 480 VAC Three Phase via 20 feet of #12 SOOW UL 1640 Portable Power-Distribution Equipment Primary OCP: 30 amp 480V disconnect fused at 10 amps NEMA 3R Indoor or Outdoor Use Line Out: 120/240VAC Single Phase Made in the USA KVA: 7.5 Secondary OCP: 20 amp max within MLO panel - 2 x 20 amp breakers for 10 outlets 120 VAC Outlets: 8 GFCI Protected Receptacles Protection: GFCI Outlets, Onboard Circuit Breakers Mounting: Steel Frame with Lifting Eyelet Portability: Lifing Eyelet Only Dimensions: 36"W X 36"D X 36"T Disconnect: Fused 30 Amp On/Off Disconnect Switch Features: Max Line Voltage: 9 amps @ 480V Special Orders- Requirements Max Load Voltage: 18 amps @ 240V Contact us for special requirements Max OCP Primary: 10 amps Toll Free: 888-325-4448 Max OCP Secondary: 20 amps E-mail: [email protected] SECONDARY AND OUTLETS ONLY Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase