Larson Electronics 7.5 kVA Power Distribution Center - 480V 3P Primary - 8 X 120V Secondary

Made in the USA The Larson Electronics MGS-7.5KVA-8O heavy duty power transformer substation converts 480VAC three phase electrical current to 120/240VAC single phase. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGS-7.5KVA-8O transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This unit is designed to operate with 480VAC which it then steps down to 120/240VAC. This transformer makes 120VAC available via 8 GFCI protected receptacles. The MGS-7.5KVA-8O converts 480VAC to 120/240VAC single phase. Protection is provided through the use of 8 GFCI protected outlets and integral breaker boxes on both input and line outs. 20 Feet of #12 SOOW cable connects to a 30 amp ON/OFF disconnect switch (fused at 20 amps) which controls power to the 7.5 KVA, 480 Volt Transformer. The transformer steps down the voltage to 120/240V single phase and uses a 50A MLO panel with four 125V, 20 amp, 1P breakers, which in turn, feed the four 125V 520R-GFCI quad outlets. The transformer is mounted to a 1/8” thick diamond plate and the distribution assembly is mounted onto a rugged 2 inch square carbon steel frame with a top located lifting eyelet to allow easy transport. This unit is weatherproof and ideal for use in applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows and exhibits and marine applications. These units are popularly used in hazardous locations where external power sources are often necessary and work well in combination with explosion proof lights. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information MGS-7.5KVA-8O Power Transformer Ratings Line In: 480VAC 3PH via 20` #12 SOOW Max Primary OCP: 20 amps @ 480V Primary Voltage: 480VAC 3PH via 20` #12 SOOW Max Secondary Output: 31.3 amps @ 240V Primary Disconnect: 480V 3PH 30A N3R fused @ 20A UL 1640 Portable Power-Distribution Equipment Primary Protection: Time Delay Fuses NEMA 3R Indoor or Outdoor Use Transformer: 7.5KVA 480V to 120/240V 1PH 60HZ N3R Made in the USA Secondary Voltage: 120/240V 1PH Secondary Panel: 120/240V 1PH 50A MLO N3R Secondary Protection: GFCIs, Circuit Breakers Secondary Breakers: (4) 20A 1P 125V Secondary Receptacles: (4) 20A 125V 520R-GFCI quads Features Special Orders- Requirements Mounting: Steel Frame with Lifting Eyelet Contact us for special requirements Portability: Lifting Eyelet Only Toll Free: 888-325-4448 Dimensions: 36"W X 36"D X 36"T Weight: - E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase