Larson Electronics 65' Trailer Mounted Mobile Communications Megatower™ - Hydraulic - 7 Stage - 4X Antenna Mount

Made in the USA The LM-HLM65-4ATM-TLR from Larson Electronics is a Trailer Mounted Mobile Communications Megatower™ that offers superior communication features for extreme environments and industrial work sites. This fold over, 7-stage hydraulic mast can reach a maximum height of 65`. Operators may complete power connections via an easily accessible electrical panel. A 4X antenna mount can be found at the top of the mast. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The LM-HLM65-4ATM-TLR is designed for remote communication systems in extreme work environments, such as mining operations, emergency camp sites and construction. This trailer mounted, towable assembly is equipped with a robust mast that is capable of reaching heights between 33` and 65`. The cell on wheels comes with an antenna quad mount (OD 3") component at the top of the tower, which measures 2`x2` (2` between posts) and measures 48" in length. For seamless storage and transportation, this mast can be collapsed to 30` for applications where a smaller footprint is required. The tower is constructed of carbon steel tubing with two feet of overlap per section. Operators can raise the mast using an included hydraulic ram and to full height using a second hydraulic system. A heavy-duty electrical panel is available for completing power connections. The hydraulic system is powered from within this panel. Mast elevation is controlled by a push button switch to operate the hydraulic ram, allowing operators to raise the mast to an upright position. Vertical deployment is operated by a second push button switch. Trailer: The entire unit is mounted onto a four wheel, dual tandem axle trailer with 12" I-beam construction. Each axle is rated at 10,000 lbs and equipped with P235/80R16 tubeless tires and wheels. The rear axle is equipped with electric brakes. A gooseneck hitch system that extends to the truck bed, above the rear axle and the trailer, is available for secure hauling. Standard heavy duty safety chains are included. Overall length of the trailer is 33`. Six 7,000 lbs hand crank jacks are used for raising the trailer up off the ground, and four 7,000 lbs hand crank jacks mounted on extending outriggers are used for leveling and stabilizing the trailer assembly. Each of the four jacks are attached to a pivoting outrigger constructed of 6` by 6" by 6.3" steel I-beams. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 6` out from the side of the trailer for added stability. This unit can withstand 35 mph winds when fully extended. When lowered to 30`, the mast can withstand 50 mph winds. When lowered to 33`, the mast can withstand wind speeds up to 95 mph with gusts of 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised. Applications: Mining sites, remote communication systems, telecommunications, construction, outdoors, extreme work sites, industrial facilities, mobile communication services, extending site capacity, site repair, disaster recovery, emergency communications, surveillance, military, outdoor operations, temporary deployment, emergency camps, security and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or messageinfo@lightingandsupplies.com for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LM-HLM65-4ATM-TLR Trailer Mounted Mobile Communications Tower Quick Summary Unit Type: Mobile Communications Tower 33` to 65` Mast Trailer Dimensions: 33`-L, 8`-W Steel Construction Trailer Tower Height (Collapsed/Extended): 30` to 65` Extreme Work Sites Footprint (Outriggers Extended): 36` x 19`-11" Hydraulic Mast Operation Hitch: Gooseneck (12" I-beam Construction) Electrical Panel Mast Head Dimensions: 2`x2` 4X Antenna Mount Mount: Quad Mount Top Withstand 125 mph Winds (Lowered) Length of Poles: 48" Antenna Pole OD: 3" Materials: Steel Tower Finish: Galvanized Tower Operation: Hydraulic Wiring: 7-Pin Flat Axles: (2) 10,000 lbs Dual Tandem Suspension: Tandem Dually Outriggers: (6) 6` x 12" x 12" I-Beams Retractable w/ (6) 7,000 lbs Manual Leveling Jacks Wheels: (8) 16" 5x4.5" Steel Rims Special Orders- Requirements Tires: (8) P235/80R16 Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Weight: - Toll Free: 1-800-369-6671 Shipping Dimensions: 33`L x 9`W x 8.5`H Fax: 1-903-498-3364 E-mail:info@lightingandsupplies.com