Larson Electronics 60 Watt LED Low Profile Wall Pack Light With Glare Shield - Daisy Chain Capable - U Bracket Mount

The LEDWP-600E-E2E-10C LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood beam without the high heat, fragile construction, or high energy costs of incandescent lighting. This led wall pack has daisy chaining capabilities. The LEDWP-600E-E2E-10C LED wall pack light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120 VAC. The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. The LEDWP-600E-E2E-10C is a daisy chain untit and is equipped with a 10 foot line in power cord for electrical connection, and a 1 foot line out power cord with a connector for power to pass through to connected units. The LEDWP-600E-E2E-10C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. An optional glare shield it shipped with this light. Mounting hardware for the LEDWP-600E-E2E-10C consists of a steel coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. Warehouse illuminated by the LEDWP-600E-E2E-10C LEDWP-600E-E2E-10C mounted 15` high illuminating a 30` long by 50` wide parking area. Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light towers can operate on current ranging from 90 to 305V AC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This LED flood lighting system is equipped with 10 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Each LEDWP-600E-E2E-10C comes with a 1 foot line out cord equipped with a connector allowing the lamp to be daisy chained to additional units. With the LEDWP-600E-E2E-10C there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600E-E2E-10C is ideal for wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples. Specifications / Additional Information LEDWP-600E-E2E-10C Wall Pack Light LEDWP-600E-E2E-10C Features Lamp Type: LED Waterproof/Vapor Proof Dimensions: W-9" D-3.25" H-6.5" Operates on Standard 110-277 VAC Weight: 8.3 Lbs Impact/Vibration Resistant Construction Voltage: 110-277 Volts AC 50/60hz 50,000 Hour LED Life Total Watts: 60 ETL Approved for Wet Locations Total Lumens: 5400 IP68 Waterproof Luminous Efficacy: 90 Lm/W Daisy Chaining Capable Lamp Life: 50,000+ Hours Color Temp: 6000K Color Rendering Index: >75 Beam Angle: 60¡ Vertical, 75¡ Horizontal Lighting Configuration: Flood Beam Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.5A @ 120V, 0.25 @ 240V, 0.22 @ 277V Ambient Temp Range: -25¡C to +60¡ Housing Material: Cast Aluminum Lens Material: Polycarbonate Special Orders- Requirements Mounting: Adjustable U-Bracket w/ Thru-Holes Contact us for special requirements Wiring: 10` 16/3 SOOW w/ Cord Cap, 1` line Out Cord for Daisy Chaining Toll Free: 1-800-369-6671 Cord Cap: 5-15, 6-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Warranty: Yes - 3 Years E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. -Scroll Down to Purchase-