Larson Electronics 6 kVA Isolation Transformer - 200V, 220V, 240V Delta Primary - 400Y/230 Wye-N Secondary - Dolly Cart

The MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R 200/220/240 V Delta 3 Phase Energy Efficient Dolly Mounted Isolation Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 6 kVA, the MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R isolation transformer is a three phase unit with a primary voltage of 200 V, 220, or 240 V Delta. It also provides a secondary voltage of 400Y/230 V Wye-N. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and is cart mounted. The unit also features 220¡C insulation with a 150¡C temperature rise and is rated IP24. Benefits: The MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R isolation transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This isolation transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Integrated floor and wall mounting brackets make installation fast and easy and the offset outward facing floor installation holes allow for easy power tool access. Safety: The MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R is an isolation transformer which means that it provides operators with an increased level of protection against electric shock. An isolation transformer can also suppress electrical noise in sensitive devices and transfer power between two circuits which must not be connected. The MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R achieves these safety features by separating or "isolating" the powered device from the power source and insulation between the primary and secondary power sources. Mounting: The MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R is mounted on an upright steel dolly cart style frame for easy movement, transportation, and positioning. The cart measures 20.875"L x 22.50"W x 52"H. The cart is also equipped with a pair of run-flat tires for easy movement around the job site or work location. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-MCD-DOE16-3P-200.220.240D-6KVA-400Y.230-N3R Dolly Cart Mounted Isolation Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 60 Hz ANN Cooling kVA: 6 IP24 Rated Primary Voltage: 200 V, 220 V, or 240 V Delta (Taps) Isolation Transformer Primary Connection: Delta Dolly Cart Mounted Primary BIL: 10 kV Primary FCAN: 0 x 0% Primary FCBN: 2 x 5% Secondary Voltage: 400Y/230 V Wye-N Secondary Connection: Wye Secondary BIL: 10 kV Winding Material: Aluminum Efficiency: DOE 2016 / NRCAN 2019 (Also Meets ON Reg. 404/12) Insulation: 220¡C Temperature Rise: 150¡C Secondary Phase Angle: 30¡C Impedance (Std): 2.5% - 6.5% Seismic Zone: Zone 4 Sound Level: Meets NEMA ST-20 Standards Primary Termination: Mechanical Lugs Secondary Termination: Mechanical Lugs Enclosure Material: NEMA Type 3R Heavy Duty Ventilated Finish: ANSI 61 Grey, UL50 Finish Special Orders- Requirements Transformer Dimensions: 21.50"H x 19.38"W x 20.20"D Contact us for special requirements Cart Dimensions: 20.875"L x 22.50"W x 52"H Toll Free: 888-325-4448 Weight: 190 lb Intl: 1-214-616-6180 Mounting: Powder Coated Steel Dolly Cart w/ (2) Run Flat Tires E-mail: [email protected] -Scroll Down to Purchase-