Larson Electronics 55 Watt Vandal Resistant LED Garage Light - 120-277V AC - IP65 Rated

The LEDVCPL-550-WCM LED Vandal Resistant Garage Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 55 watt LED light is designed to withstand rough abuse and tampering in public areas. They are a suitable replacement for 250 watt metal halide garage lights and produce a wide flood beam without the high heat, fragile construction, or high energy costs of traditional lighting. The LED LEDVCPL-550-WCM provides 100,000 hours of reliability and up to 79% savings compared to traditional 250 watt metal halide garage light fixtures. The popular LEDVCPL-550-WCM vandal resistant LED garage light from Larson Electronics is designed to withstand rough abuse and tampering in high-occupancy public areas. These LEDs replace more fragile and energy consuming 250 watt metal halide fixtures, without the required maintenance or electrical requirements associated with metal halides. This 55 watt LED garage light assembly consists of an integrated LED assembly paired with a polycarbonate lens to produce a wide light distribution suitable for replacing 250 watt metal halide flood lights. This LED garage light features a 2-piece housing constructed of die cast aluminum alloy with an injected molded rubber gasket resembling that of style garage light fixtures. This LED garage light is designed to withstand demanding conditions and is IP65 waterproof and built to resist the damaging effects of an outdoor environment. This fixture can be used indoors or outdoors as well as in confined spaces without heat buildup. The LEDVCPL-550-WCM consists of an integrated LED assembly housed within a waterproof die cast aluminum housing that is powder coated for added durability and resistance to corrosion. The built in template allows for mounting installation over standard 4" electrical boxes and easy future servicing, and the aluminum design helps heat dissipation and increased LED longevity. The LED lamp assembly is protected by a prismatic polycarbonate lens which is secured to the housing with a one piece injected rubber seal. This prismatic polycarbonate lens is designed for superior light distribution. 1/2" NPT knockouts located on the sides and back of the fixture provide a secure and sealed power connection point and rounds out this unit`s weather resistant construction. The housing design of this LED garage light helps maintain building aesthetics when replacing existing garage lighting. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over lighting. Metal Halide LED Savings Wattage 250* watts 55 watts -130 watts Amp Draw @ 120V AC 2.10 amps 0.50 amps -1.60 amps Amp Draw @ 220V AC 1.14 amps 0.25 amps -0.89 amps Amp Draw @ 240V AC 1.04 amps 0.23 amps -0.81 amps Amp Draw @ 277V AC 1.00 amps 0.20 amps -0.80 amps Lamp Life Expectancy 20,000 hours 100,000 hours +80,000 hours Operation cost per year - each(12hs/day @ 12c/kWh) $131.40 $28.90 $102.50/yr Operation cost per year -55 fixtures(12hs/day @ 12c/kWh) $6,570.00 $1,445.00 $5,125.00/yr *Includes ballast factor LED has no ballast 80% in energy savings alone, before cost of maintenance for metal halide fixtures.Up to 79% annual savings possible by switching to LED. This LED garage light is universal voltage, not multi-tap, and can be operated on a range of voltages from 100 volts to 277 volts AC 55/60Hz providing versatile power options for all locations. The LEDVCPL-550-WCM provides an efficient and highly durable alternative to standard 250 watt metal halide as well as halogen, fluorescent, and compact fluorescent garage lights while using only a fraction of the power. With the LEDVCPL-550-WCM there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 100,000 hours of operation. The LEDVCPL-550-WCM is ideal for garage lighting, garage down lighting, monuments, docks, warehouses, large parking lots, gas stations, carports, loading areas, garages, commercial buildings, schools, public areas, and security systems just to name a few examples. Specifications / Additional Information LEDVCPL-550-WCM Wall Pack Light Quick Summary / Features Listing: United States - Canada Listed for United States and Canada Lamp Type: LED Waterproof Dimensions (Inches): 11 1/4"-L x 15"-W x 11 1/4"-H Operates on Standard 110-277 VAC Dimensions (CM): 31.1-L x 40.6-W x 31.1-H Vibration Resistant Construction Weight: 7.9 Lbs. 50,000 Hour LED Life Voltage: 110-277 Volts AC 55/60hz IP65 Waterproof Watts: 55 Approved for Confined Spaces Total Lumens: 2,724 Approved for Indoor Use Luminous Efficacy: 55 lm/w Approved for Outdoor Use LED Life Expectancy: 50,000 hours Approved for Wet Locations Lighting Configuration: Flood Ambient Temp Range -40¡C to +60¡ LED Light Color: 4000K or 5500K High Performance Integrated LED Assembly Color Rendering Index: >75 Replaces 250 Watt Metal Halide Light Fixtures Power Efficiency: 85% Up to 79% Savings in Energy and Maintenance Power Factor: >0.95 Housing Matches Existing Fixtures Amp Draw: 0.50A @ 120V, 0.25 @ 240V, 0.20@ 277V Housing Materials: Die Cast Aluminum Alloy 2-Part Housing Lens Materials: Prismatic Polycarbonate Lens Gasket Materials: Injection Molded Rubber Ingress Protection: IP65 Ambient Temp Range: -40¡C to +60¡C Special Orders- Requirements Mounting: Built-In Template Mount, Quick Mount Contact us for special requirements Wiring: Pigtail Toll Free: 1-800-369-6671 Wiring Hub: Side & rear 1/2" NPT Knock-outs Warranty: 5 Years* E-mail:[email protected] Scroll Down to Purchase-