Larson Electronics 50W LED Wall Pack Light - (4) 12.5W High Output LEDs - 480V 1PH - Submersible up to 3 Meters

The LEDXUL-500-480V.1P LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a highly durable alternative to halogen, quartz and metal halide units. This 50-watt LED unit produces up to 5,000 lumens of light during use and operates on 480V single-phase power. Constructed of heavy-duty aluminum, the LED light is rugged and sumbersible up to 3 meters. The LEDXUL-500-480V.1P LED emits a long flood beam and operates on 480V single-phase power. Sumbersible up to 3 meters, the LED light assembly consists of four 12.5 watt LEDs paired with high purity specular optics to produce a light output distance comparable with a 400 watt metal halide fixture. This IP68 waterproof LED wall pack unit is designed for extreme environments and wet locations. Durability: The LED light may be used in both underwater and above water. When used underwater, the luminary is submersible up to 3 meters, with maintained submersion capabilities in both fresh water and saltwater. Above water, the device is able to stay cool without reliance on surrounding water, allowing it to hold up to hurricanes, intense storms, land-to-sea vehicles and more. To ensure operation in versatile environments, the LEDXUL-500-480V.1P is constructed of stainless steel hardware (including mounting brackets) and a heavy-duty billet aluminum CNC machined housing. The lens is made out of shatter resistant polycarbonate with a one-piece front lens cover and o-ring lens gasket. To prevent moisture from entering the power cable, the wiring of the light uses a potted power connector. With the LEDXUL-500-480V.1P there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. Dark warehouse, illuminated by 100W incandescent bulb. Same warehouse being illuminated by the LEDXUL-500-480V.1P. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Mounting: The LEDXUL-500-480V.1P is equipped with stainless steel mounting brackets which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each stainless steel bracket has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle placement of the light. This LED lamp comes with 17" pigtail wiring for completing power connections. Applications: Wet locations, marine sites, wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDXUL-500-480V.1P Wall Pack Light Ratings Lamp Type: LED Impact/Vibration Resistant Construction Dimensions: 11.67-W x-7.25"-D x 11.67"-H ETL Approved for Wet Locations Voltage: 480V 1PH CE Certified/RoHS Compliant Watts: 50W Submersible to 3 Meters Lumens: 5000 Fresh and Saltwater Applications LED Life Expectancy: 50,000 hours Usable Above Water Efficiency: 100 lm/w IP68 Waterproof LED Light Color: Cool White - 6500K Color Rendering Index: >75 Lighting Configuration: 60¡ Flood Beam: 150` Length x 60` Width Special Orders- Requirements Amps: 0.10 @ 480V Contact us for special requirements Housing Materials: Heavy Duty Billet Aluminum CNC Machined Housing Toll Free: 1-800-369-6671 Lens: Shatter Resistant Polycarbonate Lens, One-piece Front Lens Cover, O-ring Lens Gasket Intl: 1-214-616-6180 Wiring: 17" Pigtail E-mail:[email protected] Down to Purchase-