Larson Electronics 50W Explosion Proof Solar-powered LED Fixture - 24V - Slip Fit Yoke Mount - 40' 12/2 SOOW Cord

Made in Texas The EPL-PT-50LED-RT-LV-SOL-C1D2 Explosion Proof Solar-powered LED Fixture from Larson Electronics is ideal for illuminating hazardous locations and remote industrial facilities. This lighting system consists of a 50-watt explosion proof LED lamp, 190-watt solar panel and an external Class I, Division 2 enclosure, which houses one 250aH battery and controls. A slip fit yoke mount allows operators to adjust the positioning of the light directly over the target area. The EPL-PT-50LED-RT-LV-SOL-C1D2 is a sustainable lighting solution for illumination in hazardous locations. A 50-watt explosion proof LED lamp provides 6,250 lumens of output with a color temperature of 5600K and a color rendering index of 75, which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). The LED fixture is offered with a 60¡, 125¡ or 140¡ beam angle configuration. Powering the LED luminary is one 190-watt solar panel and one 250aH battery, resulting in 24 hours of continuous operation on a full charge. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. Powder coated for added durability and an attractive aesthetic appearance, the housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps. Battery/Solar Panels: Charged by one 190-watt rated solar panel, a 12V 250aH 8D battery provide constant, reliable power to the LED fixture. As with all solar powered equipment, charging time is affected by the amount of available ambient light. Indirect sunlight and low ambient light levels, such as on cloudy days, will extend the charge time. The valve regulated lead acid batteries and controls are contained within a heavy-duty remote enclosure that is powder coated aluminum for corrosion resistance and includes pad-lockable hasps. The Class I, Division 2 enclosure is equipped with circuit breakers for short circuit protection. Mounting: The explosion proof light features an adjustable swivel bracket constructed of 3/8" aluminum that allows over 270¡ of adjustment and is attached to a slip fit yoke mount for easy installation. The slip fit yoke caters to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. For example, selecting a 2" OD mount means that the yoke mount will fit onto pipes or bull horns with a 2" OD. During installation, operators may mount the solar panels away from the LED lamp on a pole, allowing optimized positioning for direct exposure to sunlight (not in the hazardous area). Standard installation for explosion proof lighting, including threaded rigid pipe to the LED light fixture and appropriate seal-offs, etc. are required. Wiring: The EPL-PT-50LED-RT-LV-SOL-C1D2 ships with 40 feet of 12/2 SOOW cord, consisting of 20` 12/2 SOOW cord between the solar panels and battery enclosure, and 20` 12/2 SOOW cord between the battery enclosure and the explosion proof LED lamp. Custom lengths are available upon request. Please contact us for special requirements. Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, agricultural sites, grain storage facilities and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-PT-50LED-RT-LV-SOL-C1D2 Explosion Proof Solar Powered LED Light Fixture Ratings/Approvals Unit Type: Solar LED System Listed for the US and Canada Lamp Dimensions: - Class I, Divisions 1 & 2 Groups C,D Solar Panel Dimensions: 31.25" x 15.55" x 2" Class II, Divisions 1 & 2 Groups E,F,G Weight: - Class III Certified to UL 844 Ed. 13 Battery/Solar Panel Specs: Certified to UL 1598 Battery Type: Valve Regulated Lead Acid Certified to C22.2 No. 137 Rev 2009 Capacity: (1) 250aH 8D 12V Certified to C22.2 No. 250.0 Panel Watts: (1) 190W Solar Panels Certified to C22.2 No. 30-M-1986 Rev 2012 Voltage at Pmax (Vmpp): 38V T5 Temperature Rating Current at Pmax (Impp): 5A Paint Spray Booth Approved Module Efficiency: 15.2% IEC 60529 Tested Solar Cells: 72 Crystalline 5” Silicon Cells IP67 Rated Waterproof Materials: Anodized Aluminum Housing w/ High Transmission Glass Lens LEL Approved Mount: Pole Mount Single LED Driver Runtime @ Full Charge: 24 Hours (Continuous) 80% Lumen Retention after 60,000 Hours Factory Sealed Light Fixture LED Lamp Specs: Recommended 10`-30` Mounting Height Lamp Type: Explosion Proof LED Adjustable Swiveling Pole Top Mount Voltage: 24V DC NEMA 4X Enclosure Total Watts: 50W IP65 Solar Panel Lumens: 6,250 lms Luminous Efficacy: 125 Lm/W LED Lamp Life Expectancy: 60,000+ Hours Color Temp: 5600K, 4500K, 3000K Color Rendering Index: >75 Beam Angle: 60¡, 125¡ or 140¡ Lighting Configuration: Flood Beam Power Efficiency: >95% Power Factor: 0.99 Operating Temp Range: -50¡C to +65¡C Operating Temp Rating: T5 Temperature Rise: 11¡C (10¡F) Over Ambient Housing Material: Copper Free Cast Aluminum Housing Finish: Epoxy Powder Coated - Grey Lens Material: Hardened Borosilicate Glass Special Orders- Requirements Gasket Material: Silicone Contact us for special requirements Mount Material: Non-Sparking Aluminum w/ SS Hardware Toll Free: 888-325-4448 Mounting: Slip Fit Yoke Mount w/ Adjustable Bracket Intl: +01-903-498-3364 Mounting OD: 2", 2-1/4", 2-1/2", 2-3/4", 3", 3-1/2" or 4" Fax: 1-903-498-3364 Wiring: 40` 12/2 SOOW Cord (20` 12/2 SOOW Cord Between Solar Panels and Battery Enclosure, 20` 12/2 SOOW Cord Between Battery Enclosure and LED Lamp) E-mail: [email protected] Scroll Down to Purchase-