Larson Electronics 50 Watt Class 1, Division 2 LED Traffic Light - Red, Green, Blue, Amber, White - Strobe or Steady

Made in the USA The HAL-TL-5X10W-C Class 1, Division 2 Chemical Resistant LED Traffic Light from Larson Electronics is chemical resistant and approved for use in wet locations and marine environments. This waterproof LED equipped light is designed for use in industrial refueling stations and areas where trucks and equipment pick up or deposit hazardous materials. The powerful and durable HAL-TL-5X10W-C explosion proof LED light from Larson Electronics is an ideal indicator lighting solution for for industrial refueling stations and areas where trucks and equipment pick up or deposit hazardous materials. The housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globes, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED traffic lamp has a 50,000 hour operational life and is available in 120-240V AC, 12V DC and 24V DC configurations for high or low voltage operation. Click Here to Enlarge This hazardous area LED light carries a T2D temperature rating and has a -29C to 40C (-29F to 104F) operating temp range. The HAL-TL-3X10W-C is Class 1, Division 2 approved, carries UL 1570/1571 and UL 595 compliance, and is waterproof and suitable for spray down areas and marine locations. This unit is hard wired, with a conduit brought to each fixture separately. Each lamp has a separate lead terminated in a junction box for individual control when hard hired, making this unit ideal for fuel depots where stop and go indicators are necessary. This LED light carries UL and CSA certification, USCG acceptance, NTRL Listing for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas. This explosion proof fixture is configured for one red, blue, green, amber, and white outputs in a strobe or steady burn configuration and offers exceptional lumen output, a 50,000+ hour life span, and the lamps are protected by Pyrex globes and polycarboate globe guards. The LED lamps in this traffic light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. The HAL-TL-5X10W-C is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal, and is ideal for locations where these hazardous compounds are commonly encountered. Mounting is provided by a heavy gauge aluminum base with four predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. Voltages: 120-240VAC 50/60Hz, 12V DC or 24V DC. Temp Code: Class 1 T2D 215¡C¡ C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.) Specifications / Additional Information HAL-TL-5X10W-C U.L Ratings Lamp Type: LED United States & Canada Colors: Red, Green, Blue, Amber, White UL Listed to CSA 22.2-137 Watts: 10 Watts Per Lamp - 50w Total Class 1,Division 2 Groups A,B,C,D Voltage: 120 - 240 VAC 60hz, 12V DC or 24V DC UL 844: Class1 Division 2 Hazardous Location Lighting Configuration: Strobe light or Steady Burn UL 595: Outside Marine Mounting: Ceiling, Wall, Flat Surface UL 1570/1571: Wet Locations Temp Rating: T2D NEMA 4X Wiring: Hard Wired, Individual leads Terminated in Junction Box -29C to 40C (-29F to 104F) Op Temp Lamp Life: 50,000+ Hours CSA Approved Mounting: PredrilledAluminum Base USCG Accepted New York City Department of Buildings Approved Material meets UL 94-V-0 standards for flame retardancy Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Scroll Down to Purchase