Larson Electronics 480W Waterproof Power Supply Converts 90-305V AC to 12/24 Volts DC - Capacity to 40 Amps Max

The Larson Electronics DCP-40 Waterproof 480W Power Supply converts 90-305V AC electrical current to 12V DC @ 40 Amps. This converter is designed to be hardwired into building, boat or vehicle electrical supplies where the voltage is typically within the 90-305V AC range and reduces it to 12VDC or 24VDC, allowing users to use standard AC power to operate equipment like our LED light bars and HID Golights that require low voltage DC current. The DCP-40 480 watt power converter provides a safe and effective way for users to tap into and utilize 90 to 305 Volt AC power sources and convert this current to 12 Volts DC or 24 Volts DC for use with equipment that requires 12/24 volt DC electrical power. This unit can be operated with input current ranging from 90 to 305V AC and will output 480 watt 12 Volt DC current at 40 amps or 24 Volt DC current at 20 amps. This power converter features an IP67 rated waterproof design, making it suitable for indoor or outdoor use and is wet-damp area approved. This converter includes integral short circuit, over voltage, over temperature and overload protection that will shut down the unit or reduce output in case of faults and overloads to protect the unit and connected equipment from damage. The small size and wide input voltage range of this unit make it ideal for indoor-outdoor operation of Larson Electronics LED light bars, Golights and other equipment that requires 12VDC current and anywhere 12 volt DC power is not readily available. Measuring 11.02 inches long by 5.67 inches wide by 1.91 inches deep, this unit weighs approximately 6.39 pounds and is mounted with two conventional screws via slots that allow removal and repositioning simply by loosening the screws. This converter comes with clearly labeled input and output leads that are approximately 1 foot long and stripped and tinned for hardwired connections using butt splice connectors, wire screws, plates, etc. Features: The DCP-40 480 watt converter features full range, universal AC input capability and can be operated with 90 to 305V AC. The unit converts this AC power input to 480 watt, 40 Amp 12V DC or 20 Amp 24V DC output. IP67 rated, this unit is waterproof, wet and damp area approved and suitable for indoor or outdoor applications. Integrally designed protection includes overload, short circuit, over temperature and over voltage safeguards to prevent overheating and unit damage in case of faults or overly heavy current draw. This unit will limit current when an over current condition is encountered and recovers when the condition is removed. This unit will enter hiccup mode under short circuit conditions and recover when the fault is removed. The unit will also shut down when an over temperature condition occurs and recovers automatically when the temperature returns to normal levels. This power converter has a -40¡C to +70¡C operating temperature range and is UL UL60950-1 and UL8750 compliant as well as compliant with worldwide safety regulations for lighting. This unit has a 96% conversion efficiency and is suitable for use with moving LED signs and similar LED equipment. These units also feature Power Factor Correction, adjustable output current range from 20 ~ 40A either through the output cable or internal potential meter and have an input frequency range of 47 ~ 63Hz. NOTE: In order to obtain the best performance and the longest operational life from these units, it is recommended that you do not exceed 75% of the unit`s output amperage. To determine if this converter suits your desired application, add together the total wattage of the equipment you intend to use with this unit and divide this total by 12 volts to find the total amperage draw that will be placed upon the converter. For example, if you are using two of our LEDP10W-120E 120 watt LED lights, 240 watts divided by 12 volts is 20 amps. This would mean the DCP-40 is well suited as it would run at 50% capacity to produce the necessary 20 amps. Running these units at 100% of their capacity can create excess heat and lead to shortened converter life. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information DCP-40 480W Power Supply DCP-40 Features Line In Voltage: 90-305V AC @ 47~63 Hz IP67 Rated Waterproof Line Out: 12V DC @ 40 Amps, 24V DC @ 20 Amps Overload, Short Circuit ,Over Voltage, Over Temperature Protection Watts: 480 UL8750 & UL60950-1 Compliant AC Input Connector: 1` Pigtail, Stripped/Tinned Leads International Lighting Safety Standards Compliant DC Output Connector: 1` Pigtail, Stripped/Tinned Leads Suitable For LED Moving Signs Protection: Short Circuit/Overload/ Over Voltage/Over Temperature Suitable For Wet or Damp Locations Mounting: Two Screw Slide Notches Special Orders- Requirements Operating Temp: -40¡C to +70¡C Contact us for special requirements Efficiency: 96% Toll Free: 1-800-369-6671 Dimensions: 11.02"-L x 5.67"-W x 1.91"-H Weight: 6.39 Lbs E-mail:[email protected]