Larson Electronics 45KVA Power Distribution - 480V Pri - 3x30A, 1x50A.240V & 5x20A.120V Receptacles - Locking Casters

Made in Texas The Larson Electronics MGS-45K-3X240.30A-240.50A-5X120 heavy duty 3-phase power distribution substation gives operators the ability to plug in tools and equipment via three 30-amp L6-30 receptacle, one 50-amp CS8369 receptacle and five 5-20R GFCI receptacles. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* This portable power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant maintenance, equipment installations and repairs. On the primary side, the 20` #8 Type W cord with 460P7W connector provides power to the 60-amp fused 480V disconnect with three 60-amp time delay fuses protecting the 45KVA 480-240D/120 3-phase transformer. On the secondary side, a 100-amp main breaker 240D/120 panel provides protection for five 20-amp, 125V, 5-20R GFCI, three 30-amp, 250V, L6-30R and one 50-amp, 250V, CS8369 receptacles. The panel, disconnect and transformer are NEMA 3R rated. Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Applications:This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 orinfo@lightingandsupplies.com to discuss your specific requirements. Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Specifications / Additional Information MGS-45K-3X240.30A-240.50A-5X120 Power Distribution System Ratings Line In: 20’ #8 Type W cable with 460P7W connector UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480VAC 3PH NEMA 3R Indoor or Outdoor Use Primary Disconnect: 480V 3PH 60A fused @ 60A N3R Made in the USA Transformer: 45KVA 480V to 240D/120V 3PH N3R Secondary Voltage: 240D/120VAC 3PH Secondary Panel: 240D/120V 100A MCB 3PH N3R Secondary Breaker Protection: (3) 30A 2P 250V, (1) 50A 3P 50, (5) 20A 1P 125V Secondary Receptacles: (3) L6-30R, (1) HBLCS8369, (5) 520R-GFCI Transportation: Skid pockets, locking casters, and top pick eye Form Factor: 48”-L X 44”-W X 72”-H Weight: ~640 lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 60 amps @ 480V Toll Free: 888-325-4448 Max Secondary OCP: 100 amps @ 240V E-mail: info@lightingandsupplies.com Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase