Larson Electronics 45 KVA Portable Power Distribution Transformer - 480V to 380V Delta 3PH - 60 HP VFD Secondary

Made in the USA The Larson Electronics J10803 heavy duty power transformer substation converts 480V AC three phase electrical current to three phase 380V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics J10803 portable power distribution system gives operators the ability to power their 380 volt equipment from a single system. On the primary side, operators bring 480V line-in power using 20` of #8 Type W cord. On the secondary side, operators can access a 60-HP variable frequency drive for 380V motors and equipment. Operation: A 20` #8 Type W cord brings 480V three phase power to the 60-amp, 480V three-phase fused disconnect, which contains three 60-amp time delay fuses, and passes power to the transformer. The NEMA 3R 45 KVA transformer converts 480V three phase power to 380V three phase 60 Hz and passes the current to a 60 HP 380V three phase variable frequency drive on the secondary side. The secondary NEMA 3R variable frequency device is suitable for medium-size motors and loads. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking foam filled casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information J10803 Power Distribution System Ratings Line-In Cord: 20` #8 Type W Cord UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V AC 3PH NEMA 3R Indoor or Outdoor Use Primary Disconnect: 60A 480V 3PH N3R Fused @ 60A Made in the USA Primary Protection: Disconnect Transformer KVA: 45KVA 480V to 380V 3PH 60 Hz N3R Secondary Voltage: 380V Delta 3PH Secondary Device: 75A 60 HP 380V 3PH VFD N3R Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 10” foam filled casters Finish: Powdered Coated - Grey Dimensions: 34”-L X 40”-W X 58”-H Special Orders- Requirements Weight: 600 lbs Contact us for special requirements Features: Toll Free: 888-325-4448 Max Primary OCP: 60A @ 480V Intl: 1-214-616-6180 Max Secondary Output: 68.4A @ 380V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase