Larson Electronics 40 Watt General Area Use LED Light Fixture - Cabinet Panel Strip Light - 120-277V AC- Low Profile

Buy American Compliant The Larson Electronics GAU-48-IPS-LED-1227 is a low profile lighting solution approved for outdoor environments and is UL 1598 compliant for use in wet locations. This powerful 48" long LED strip light produces 5,000 lumens, operates on 120-277V AC, and is suitable for a variety of applications. The GAU-48-IPS-LED-1227 40 watt low profile strip light is designed to provide a high output and ruggedly durable lighting solution for applications where waterproof lighting is required. This low profile LED strip light operates on 120-277V AC, and is offered with a wide assortment of cord caps. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP65 for protection against exposure to low pressure water jets from all directions and sealed against dust penetration. These units are configured in a 48" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. Once installed, operators can rotate the light fixture side to side to position the light output as needed. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures. Durability/Mounting: The GAU-48-IPS-LED-1227 hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing ingress protection against dusts, and protection against low pressure jets of water from all directions, such as wash-down areas. This design is weatherproof, suitable for indoor or outdoor applications, and ideal for areas where wet, damp, or dusty conditions are commonly encountered. The LEDs in this linear light are Cree LEDs that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 125 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. This LED light produces 5,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than incandescent, halogen, or fluorescent light fixtures. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Mounting: Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170¡ vertically for the best placement. The entire assembly weighs 3.5 lbs and measures 48 inches in length, 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed. The power supply for this unit is mounted separately. Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light towers can operate on current ranging from 100 to 277V AC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This low profile strip light is equipped with 6 foot of 16/2 chemical and abrasion resistant SOOW cord, an inline driver with waterproof disconnect, and 3` of 16/3 SOOW cable that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Versatility: The GAU-48-IPS-LED-1227 carries an IP65 water resistant rating ensuring protection against ingress from dusts, dirt, and protection against light water jets sprayed directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered. Specifications / Additional Information GAU-48-IPS-LED-1227 Weatherproof LED Strip Lighting Ratings Lamp Type: LED Listed for United States and Canada Dimensions: 48"-L x 2.68" -W x 1.69"-D CSA 22.2 No. 250.0 Weight: 5 lbs. UL 1598 Voltage: 120-277V AC 50/60 Hz IP65 Ingress Protection Total Watts: 40 70% Lumen Retention after 50,000 Hours Total Lumens: 5,000 Factory Sealed Light Fixture Luminous Efficacy: 125 Lm/W Lamp Life: 50,000+ Hours Color Temp: 5000K Color Rendering Index: >75 CRI Beam Angle: 30¡ Spot or 100¡ Flood Lighting Configuration: Spot or Flood Pattern Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.34A @ 120V, 0.15A 240V Ambient Operating Temp Range:-40¡ C to +60¡C Housing Material: Extruded Aluminum Special Orders- Requirements Housing Finish: Powder Coated - Black Contact us for special requirements Lens Material: Polycarbonate Toll Free: 888-325-4448 Mounting: Adjustable Swivel Mount Surface Bracket Wiring: 6` 16/2 SOOW w/ Flying Leads E-mail: [email protected] Down to Purchase-