Larson Electronics 37,500 Watt LED String Light - (250) 150 Watt LED Light Fixtures - 277V AC - I-Beam Mounts

Made in the USA The Larson Electronics WAL-SL-250-150LED-RT-IBC Outdoor Rated 37,500 watt LED String Light set is approved UL 1598 and is ideal for inspection activities and temporary illumination in wet or damp locations requiring waterproof protection. This daisy chain temporary lighting system provides 3,250,000 lumens and comes equipped with individual I-beam mounting brackets per light head, allowing for flexibility within the job site. This work area string light set from Larson Electronics contains a total of 150 watt work lights equipped with I-beam mount clamps and connected in series along 5000` of SOOW cable. The 150 watt LED lights are evenly spaced along the 5000` feet backbone and junctioned together with 20` of cable between each light. The cord on this unit is terminated with a 277 volt waterproof industrial grade cord cap complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. This unit is dividied into three seperate assebmlies and will require three connections to power sources. Each waterproof light fixture provides 13,000 of high quality light while drawing only 150 watts, for a combined 3,250,000 lumens and 37,500 watts. These lights are direct replacement for 400 watt metal halide temporary fixtures. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps these fixtures to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier traditional fixtures and requires less hardware to install. Click Photo to Enlarge Click Photo to Enlarge This unit incorporates two-hundred fifty industrial grade 150 watt LED lamps connected in series and is suitable for use in areas where wet or damp conditions are or may be present. The cast aluminum housings, tempered glass lens, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration for job site illumination. The lamps can be moved around and mounted to different points within the work area. The lights, however must remain within 20 feet of one other. Each LED light features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This stringer configured to be operatedon 277 VAC. Each LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. Stringer Energy Consumption Comparison 400W Metal Halide 150W LED Wattage 115,000* watts 37,500 watts Amp Draw @ 120V AC 958.5 amps 312.5 amps Amp Draw @ 240V AC 479.25 amps 156.25 amps Lamp Life Expectancy 18,000** hours 50,000+ hours Color Temperature 4100K 6000K Operation cost per day (12hs/day @ 12c/kWh) $165.75 $54.00 Operation cost per month (12hs/day @ 12c/kWh) $4,968.00 $1,620 Operation cost per year(12hs/day @ 12c/kWh) $60,444 $19,710 *Wattage includes ballast factor to include electricity consumed by metal halide ballast. **Estimated lamp life does not reflect accidental damage or premature failures due to portable applications. LED lamps do not suffer from the same physical downfalls that glass bulbs are susceptible of during temporary lighting. Made in USA Quality Lamp Features 1. Federal Spec 600V Cord2. Rated for US and Canada3. Total of (250) 150 watt LED Lamps.4. Non-sparking aluminum construction.5. 277V AC Operation6. SOOW cable.7. Aluminum Hooks for Convenient Placement. 37,500 watts of LED illuminationNon-sparking aluminum housingsCast aluminum HousingTempered Soda-Lime Glass LensIntegrated lamp shock absorbers prevent drop damageI-Beam Mount for hanging and hands free operationSOOW Abrasion Resistant Cable Specifications / Additional Information WAL-SL-250-150LED-RT-IBC I-Beam Mount Stringer Ratings/Approvals Listing: United States & Canada Certified to UL 1598 Lamp Type: LED Certified to CSA 22.2 No. 250 Dimensions: 14"H x 16"W 5"D (per lamp head) LEL Approved Total Watts: 37,500 IP67 Rated Waterproof Single Lamp Watt: 150 watts Multiple Driver Banks Total Lumens: 3,25,000 80% Lumen Retention after 50,000 Hours Single Lamp Lumens: 13,000 3,250,000 Lumens Total Illumination Color Temp: 5600K Temporary I-Beam Mounting System Color Rendering Index: >75 CRI Lighting Configuration: 60¡ Flood or 125¡ Wide Flood Lamp Life: 60,000+ Hours Voltage: 277 Volts AC, 50/60Hz Amps: 135.38A @ 277V Mounting: Temporary I-Beam Clamps - (1) Per Fixture Special Orders- Requirements Total Weight: Contact us for special requirements Single Lamp Weight: 35 lbs Toll Free: 888-325-4448 Temp Rating: T5 -40¡C to +65¡C Intl: 1-214-616-6180 Wiring: SOOW Cable - 20` between lamps Fax: 1-903-498-3364 Total Length: 5000` E-mail: [email protected] Down to Purchase