Larson Electronics 34W Emergency Fluorescent Light - 2' 2 Lamp - Emergency Battery Backup - ATEX/IECEx

The ATEX-HALP-EMG-24-2L-T8 Hazardous Area Fluorescent Light Fixture from Larson Electronics is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This emergency light fixture is specifically designed to handle the rigors of wet and corrosive marine environments, and comes equipped with an added battery backup providing 3 hours of emergency runtime. The ATEX-HALP-EMG-24-2L-T8 hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This ATEX/IECEx rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant polycarbonate lens. Corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is ATEX/IECEx approved for Zones 1 and 2, and 21 and 22. The HALP-EMG-48-2L-T8 also carries a T4 temperature rating. This fluorescent light works, mounts and is wired like our ATEX-HALP-24-2L explosion proof fluorescent light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will run the standard UL suggested 3 hours after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 900 lumens for 3 hours. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. Surface Mounting: Flange type aluminum mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. Pendant Mounting: This light fixture can hang from the ceiling suspected by rigid pipe. Each fixture is equipped with either two 1/2", 3/4" NPT hubs, M20 or M25 hubs on either side of this fluorescent lamp. Operators will bring rigid pipe down to the threaded mounting ups. The wiring is fed down through the rigid pipe to one of the NPT hubs and tied to the fixture`s lead wires to complete the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: The ATEX-HALP-EMG-24-2L-T8 is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks. High Quality Features Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. 3. Fixture housing constructed of glass fiber reinforced polyester.4. Lamp cover-diffuser constructed of high impact polycarbonate for corrosion resistance and lamp protection.5. 1/2", 3/4", M20 or M25 hubs threaded access hole for wiring conduit. F17-T8/841 – 34 watt, 1325 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8) Specifications / Additional Information ATEX-HALP-EMG-24-2L-T8 Hazardous Area U.L. Ratings Listing: United Kingdom, Europe and Asia ATEX/IECEx Zones 1 & 2 and 21 & 22 Lamp Type: Fluorescent ATEX Ex II 2 G Ex d e mb IIC T4 Gb Dimensions: W-4.12 " L-26 " H-3.5" ATEX Ex II 2 D Ex tb IIIC T80¡C Weight:8 Lbs IECEx Ex d e mb IIC T4 Gb Voltage: 120-277V AC 50/60 Hz IECEx Ex IIIC T80¡C Db Low Voltage (Optional): 12-24V DC IP66, IP67 Total Watts: 34 watts Wet Area Suitable Total Lumens: 2,652 Luminous Efficacy: 78 Lm/W Lamp Life Expectancy: 24,000 Hours Color Temp: 4100K Beam Angle: 150¡ Ambient Operating Temp Range:-30¡C to +50¡C Operating Temp Range: T4 Rated Mounting: Surface (2) Flange Type Aluminum Brackets Housing Material: Polyester and Glass Fiber Housing Gasket Material: Silicone Lens Material: Polycarbonate Lens Special Orders- Requirements Wiring Hub: (2) 1/2" , 3/4", M20 or M25 Threaded NPT Hubs on Either Sides Toll Free: 1-800-369-6671 E-mail:[email protected]