Larson Electronics 347/480V Explosion Proof 100 Watt Stanchion LED Light Fixture - Wire Guard - Class 1 Division 1

Made in the USA The Larson Electronics EPL-STCHN-100LED-RT-480V Stanchion Mount LED light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This explosion proof stanchion mount light operates on 347-480V AC. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 stanchion mount explosion proof light fixture provides 11,667 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The EPL-STCHN-100LED-RT-480V stanchion mount explosion proof light features an aluminum bracket constructed of 3/8" aluminum that is offered in multiple preset angles and is attached to a slip fit yoke for easy installation. The slip fit yoke is built to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. The wiring of the EPL-STCHN-100LED-RT-480V is terminated in a junction box with 3/4" threaded hub. Operators can run rigid pipe or flexible conduit to the junction box, terminating the electrical connections within. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-Striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 11,667 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The lamp is T5 temperature rated, Design Lights Consortium approved, and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. Energy Consumption Comparison Metal Halide LED Wattage 250 watts 100 watts Amp Draw @ 120V AC 2.38 amps 0.83 amps Amp Draw @ 220V AC 1.30 amps 0.45 amps Amp Draw @ 240V AC 1.19 amps 0.42 amps Amp Draw @ 277V AC 1.03 amps 0.36 amps Amp Draw @ 12V DC 23.75 amps 8.3 amps Amp Draw @ 24V DC 11.88 amps 4.17 amps Lamp Life Expectancy 20,000 hours 50,000+ hours Operation cost per year(12hs/day @ 12c/kWh) $149.80 $52.56 The EPL-STCHN-100LED-RT-480V stanchion mount explosion proof LED flood light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. The entire assembly is ETL listed Class 1, Divisions 1-2 and Class 2, Divisions 1-2 for use in hazardous locations and approved for paint spray booths. The extreme durability, universal voltage capabilities, and LED longevity make this LED flood lighting system an ideal fit for frac pads, rigs, offshore, and any application that requires a Class 1 Division 1 pole top light fixture. Mounting Notes: The EPL-STCHN-100LED-RT-480V stanchion mount explosion proof light features a preset angled bracket constructed of 3/8" aluminum that is offered in 10¡, 25¡, 45¡, 60¡, and 90¡ configurations and is attached to a slip fit yoke for easy installation. The slip fit yoke is built to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. For example, selecting a 2" OD mount means that the yoke mount will fit onto pipes or bull horns with a 2" OD. High Quality Features Superior LED Benefits 1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MV.5. Retains 80% lumen output after 60,000 operating hours.6. Powder coated aluminum fixture body. 7. Slip fit yoke mount for easy installation.8. Low profile - Light weight9. 11,667 Lumen output from only 100 watts10. 347-480V AC Universal Voltage 1. 60,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-Spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPL-STCHN-100LED-RT-480V Pole Top Slip Fit Mount Ratings/Approvals Listing: United States - Canada Listed for United States and Canada Lamp Type: Cree LED Class I, Divisions 1 & 2, Groups C and D Dimensions: 16"-W x 22"-H x 18"-D Class II, Divisions 1 & 2, Groups E,F,G Weight: 42 lbs Class III, Divisions 1 & 2 Voltage: 347-480V AC Certified to UL 844 Ed. 13 Total Watts: 100W Certified to UL 1598 Total Lumens: 11,667 Certified to C22.2 No. 137 Rev 2009 Luminous Efficiency: 116.67 Lm/W Certified to C22.2 No. 250.0 Lamp Life: 60,000+ Hours Certified to C22.2 No. 30-M-1986 Rev 2012 Color Temp: 5000K, 4000K, 3000K T5 Temperature Rating Color Rendering Index: >75 CRI Paint Spray Booth Approved Beam Angle: 60¡ or 125¡ IEC 60529 Tested Lighting Configuration: Flood Pattern IP67 Rated Waterproof Power Efficiency: >95% Multiple Driver Banks Power Factor: 0.992 80% Lumen Retention after 60,000 Hours Ambient Operating Temp Range:-50¡ C to +65¡C Factory Sealed Light Fixture Operating Temp Rating: T5 Recommended 10` to 30` Mounting Height Lamp Housing Material: Copper Free Cast Aluminum 120-277V AC or 11-25V AC/DC Lens Material: Hardened Borosilicate Glass Adjustable Swiveling Pole Top Mount Mount Material: Non-Sparking Aluminum w/ SS Hardware Multiple Slip Fit Yoke Diameters Available Gasket Material: Silicone Stanchion Angles: 10¡, 25¡, 45¡, 60¡, 90¡ Special Orders- Requirements Mounting: Slip Fit Yoke Mount Contact us for special requirements Yoke Diameter: 1.5", 2", 2-1/4", 2-1/2", 2-3/4", 3" Slip Fit Toll Free: 1-800-369-6671 Wiring: Flying Leads inside Junction Box Intl: 1-214-616-6180 Wiring Hub: 3/4" NPT Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase-