Larson Electronics 10 Watt Explosion Proof LED Light - Stanchion Mount - 120-240VAC or low voltage - Class 1 Division 1

Made in Texas The EPL-LED7W-STNCH Explosion Proof LED Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D, and produces 1050 total lumens. Water proof and IP67 rated , this LED equipped light is a stanchion mount unit and available with several color and voltage options. The powerful and durable EPL-LED7W-STNCH explosion proof LED light from Larson Electronics is paint spray booth approved and ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable general purpose light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with red, blue, green, amber, purple and white light colors as well as different voltages including- 120-277 Volts 60hz AC, 12 Volts DC, or 24 Volts DC. This lamp is also available in infrared IR850 or IR940nm wavelengths. This hazardous area LED light carries a T3C temperature rating and is UL Listed Class 1, Groups C and D, Class 2, Groups E and F, and Class III, Groups E, F and G. This strobe light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 1-1/4" hub. The LED lamp in this unit offers exceptional power and a 50,000+ hour life span and is energized by leads which pass through a sealing compound that separates the lamp chamber from the wiring compartment. The LED lamp assembly is protected by a heavy aluminum cage guard and an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. The LED lamp in this strobe light offers a 50,000+ hour lifespan and 1050 lumen light output. Light output with this explosion proof LED light is 40% brighter than a 100W incandescent bulb when measured with an Extech light meter at 8 feet. The unit shown is pendant mount, and we offer ceiling and wall mount versions as well for added installation versatility. Voltages: 120-277VAC 50/60Hz or 12VDC or 24VDC12–80VDC draws 0.4A average @ 12VDC tapering to 0.05A average @ 80VDC.16–24VAC draws 0.35A average.120VAC draws 0.04A average. Temp Code: Class 1 T2C 230¡ C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.) Specifications / Additional Information EPL-LED7W-STCHN U.L Ratings Lamp Type: 10 Watt LED Class 1, Groups C and D Lamp Dimensions: 7.25"-Wide, 15" Height Class II, Groups E and F- T3 Temp Rating Lamp Weight: 9 lbs Class III, Groups E, F and G Hub: 3/4" Threaded IP67 (water proof) Lumens: 1050 (735 VDC) Suitable for Paint Spray Booths Voltage: 120 Volts 60hz AC, 277 Volts AC, 12 Volts DC, or 24 Volts DC T3C Temperature Rating Lighting Configuration: Steady Burn Mounting: Stanchion Temp Rating: T3COperating Temp: -55C to 85C LED Lamp Watts: 10 Watts (7W for VDC) Special Orders- Requirements Strobe Count: N/A Contact us for special requirements Wiring: 1-1/4 inch Hub Toll Free: 888-325-4448 Lamp Life: 50,000+ Hours Fax: 1-903-498-3364 E-mail: [email protected]