Larson Electronics 320' C1D2 Hazloc LED String Lights - 11 Lamps - Chemical Resistant - 12/3 SOOW Cord w/ Blunt Cut End

Made in TexasThe HAL-SL-11-12.3-MDES-NP from Larson Electronics is an Explosion Proof LED String Light Set that is UL Listed for Class I Division 2 Groups A, B, C and D environments, making the unit ideal for temporary work lighting and inspection activities in hazardous locations requiring explosion proof protection. These explosion proof string lights come with 320 feet of 12/3 SOOW explosion proof cord equipped with blunt cut ends so that operators can install their own cord caps or equipment. This luminary features eleven, 10-watt LED lamps that are connected together to form a single lighting system.This 110-watt explosion proof LED string light set from Larson Electronics produces a total combined output of 11,550 lumens of bright white light. Eleven, 10-watt LED work lights equipped with hanging eye-bolts are connected in series along 320 feet of 12/3 SOOW explosion proof cord. The power cord on this unit is terminated in blunt cut ends for customer provided cord caps and equipment. This LED string light does not rely on a ballast for operation. The housing on each lamp is constructed of non sparking aluminum, which helps maintain its lightweight and durable features. This hazardous location string light is Class I, Division 2 hazardous location environment approved and is ideal for hazardous work areas where a ready source of easily managed lighting is desired. 100 Watt Incandescent Bulb With the HAL-SL-11-12.3-MDES-NP This unit incorporates eleven, 10-watt LED jelly jar lights connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. Each LED lamp projects 1,050 lumens of light, for a combined total of 11,550 lumens. The output of this string light is stronger and of better quality than sets equipped with 100 watt incandescent bulbs, yet it uses only 10% as much electrical current. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat sinks to properly disperse the heat. Each LED bulb is engineered to disperse and expel this heat quickly and efficiently, keeping the lamp cooler than traditional light sources. This LED work light operates at a lower surface temperature than a comparable model with traditional light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the safety within the work environment.Stringer Energy Consumption Comparison (Single Stringer) IncandescentCFLLEDWattage (single unit)100 watts26 watts10 wattsWattage (total)800 watts208 watts110 wattsAmp Draw @ 120V AC6.67 amps1.73 amps0.67 ampsAmp Draw @ 220V AC3.64 amps0.95 amps0.36 ampsAmp Draw @ 240V AC3.33 amps0.87 amps0.33 ampsAmp Draw @ 24V AC33.33 amps8.67 amps3.33 ampsLamp Life Expectancy1,500 hours8,000 hours50,000 hoursColor Temperature2800K4300K6000KOperation cost per day(12hs/day @ 12c/kWh)$1.15$0.30$0.12Operation cost per month (12hs/day @ 12c/kWh)$34.56$8.99$3.46Operation cost per year(12hs/day @ 12c/kWh)$420.48$109.33$42.05The lamps in this unit are high efficiency LEDs which require no ballast, so there is no inline lamp hardware to manage. This hazardous location LED string light will operate on any voltage ranging from 120 Volts AC to 277 Volts AC on 50/60 Hz. We also offer this light with 11-25 Volts AC/DC. The light produced by this unit has a 6000K color temperature, which is much sharper and whiter than the light produced by incandescent lamps. Wiring: This explosion proof LED string light is equipped with a 5 foot input whip of 12/3 chemical and abrasion resistant SOOW cord that is equipped with blunt cut ends so that operators may connect to any cord cap or equipment they choose. **PLEASE NOTE** Voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.These lights carry a T2D temperature rating and have a -29¡C to 40¡C (-29¡F to 104¡F) operating temp range. The HAL-SL-11-12.3-MDES-NP carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. This LED string light carries UL and CSA certification, USCG acceptance, UL 1570/1571 approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas.The LED lamps in this unit offers exceptional power, 50,000+ hour lifespans and are protected by a Pyrex globe and polycarbonate globe guard. The HAL-SL-11-12.3-MDES-NP is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal and is ideal for locations where these hazardous compounds are commonly encountered.Applications: Chemical and petrochemical plants, refineries, mines, offshore and land based rigs, power generation facilities, wastewater treatement facilities and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Made in USA QualityLamp Features1. Federal Spec Cord.2. Explosion Proof.3. (11) 10 Watt LED Lamps for 11,550 Total Lumens.4. UL Class I Div. 2 5. 120-277 Volt Operation.6. SOOW Cable.7. Aluminum Hooks for Convenient Placement.Each 10 watt LED light produces 1,050 lumensNon-metallic housing50,000 hour LED LampSwivel hook for hanging and hands free operationSpecifications / Additional Information HAL-SL-11-12.3-MDES-NP Hazardous Location 320` LED String LightRatings/ApprovalsListing: United StatesClass I, Division 2 Groups A,B,C,DLamp Type: LEDUL 595: Marine Dimensions- Each Lamp: 5.94" OD , 9.60" Height UL 844: Class I Division 2 Hazardous LocationTotal Length: 320`UL 1570/1571: Wet LocationsTotal Weight: 120 lbsNEMA 4XVoltage: 120-277 Volts 50/60hz AC, 11-25V AC/DCUSCG AcceptedTotal Watts: 110W (10 Watts per Lamp)CSA CertifiedTotal Lumens: 11,550Made in the USALuminous Efficacy: 105 Lm/W 11 LampsLamp Life: 50,000+ HoursColor Temp: 6000KAmbient Operating Temp Range: -29¡C to 40¡C (-29¡F to 104¡F)Operating Temp Rating: T2DSpecial Orders- RequirementsMounting: Hanging Eye-boltContact us for special requirements Wiring: 320` 12/3 SOOW Cord - 5` Input WhipToll Free: 1-800-369-6671 Warranty: Yes - 3 Years*Intl: 1-903-270-1187 E-mail:[email protected] Scroll Down to Purchase-