Larson Electronics 30KVA Portable Distribution Cart - 480V to 208Y/120 3PH - (12) 5-20R - 20' Line-In Cord

Made in Texas The Larson Electronics MPD-480.3P-30KVA-208120.MLO-12X120.20A heavy duty power transformer substation converts 480V AC three phase electrical current to three phase 208Y/120 AC. This unit provides operators the ability to safely tap into and distribute 120V power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications, with a fully potted transformer and NEMA 3R load center. Operators can connect up to twelve 20A 120V devices. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics MPD-480.3P-30KVA-208120.MLO-12X120.20A transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. Operation: The customer provided line-in cord brings 480V three phase power to the 30-amp, 480V 3-phase fused disconnect, which contains three 30-amp time delay fuses protecting the 30 KVA transformer. The NEMA 3R transformer converts 480V three phase power to three phase 208Y/120. The secondary side of the transformer feeds a 208Y/120 NEMA 3R 100-amp MLO panel. This secondary panel contains twelve 20-amp, 120V breakers protecting twelve 20-amp GFCI duplex receptacles. All outlets are protected by waterproof hinged covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift for an additional cost skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. 1/8" metal side walls prevent children and unwanted bystanders from accessing the load center or disconnecting equipment during operation and deployment. Two 1/8" hinged doors allow operators to access the disconnect, breaker panel, and receptacles. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480.3P-30KVA-208120.MLO-12X120.20A Power Distribution System Features: Line-In Cord: Customer provided Primary OCP: 30A @ 480V AC Line-In Cord Cap: Customer provided NEMA 3R Primary Voltage: 480V AC Three Phase UL 1640 Certified Primary Disconnect: 30A Fused @ 30A Made in the USA Transformer KVA: 30KVA 480V-3P to 208Y/120-3P N3R Secondary Voltage: 208Y/120 3P Secondary Panel: 100A MLO N3R Secondary Breakers: (12) 20A 120V Secondary Outlets: (12) 20A 120V GFCI Duplex Outlet Protection: Weatherproof Hinged Covers Special Orders- Requirements Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Finish: Powdered Coated - Blue Toll Free: 888-325-4448 Dimensions: 34”-L X 40”-W X 58”-H Weight: 600 lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase