Larson Electronics 30' Portable Tower - 7.5' Trailer - (1) Junction Box - (1) 120V 5-20C Connector - 20' Cord w/ 5-20P

Made in the USA The Larson Electronics LM-30-8.5-5S-1XN3B-PW-NB-TLR7-120V-1X20A Portable Tower provides a safe and effective way for operators to quickly deploy cameras, security devices, and other equipment to elevations up to thirty feet. This light plant features a telescoping light tower that folds over for easy transportation, features a rotating boom that allows for 360¡ of rotation, and a removable mast head for storage when not in use. This 120V AC unit features one, 120V 5-20C connector at the top of the tower and a 20` 12/3 SOOW cord with a weatherproof 5-20P cord cap for completing electrical connections. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The trailer mounted light mast features a 12" x 12" x 6" junction box mounted at the top of the mast for connecting cameras and other devices. This junction box is ideal for mounting security cameras for a 360¡ field of view along with other electrical devices for each operator`s specific needs. The top mounted junction box is mounted to the mast head via a half-moon shaped mounting plate. External sealtite coiled tubing runs around the mast to allow operators to run Ethernet cable to the junction box at the top of the mast. The entire assembly is mounted onto a 7.5` single axle trailer, allowing operators to transport this portable light tower from location to location. The portable tower operates on 120V AC. One, 120V 5-20C connector is accessible at the top of the mast, allowing operators to connect and power 120V customer-provided equipment in elevated positions. This unit comes with 20` of 12/3 SOOW cord with a weatherproof 5-20P cord cap, which is accessible from the job box and can be used to power the system. Light Mast: This telescoping five stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy a variety of equipment in locations where it must be elevated to heights up to 30` for effective coverage. This light mast can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a base section 6.6` in length and 6" by 6" by 3/16" thick, lower section 6.78` in length and 5" by 5" by 3/16" thick, middle section 6.93` in length and 4" by 4" by 1/8" thick, upper section 7.08` in length and 3" by 3" by 1/8" thick, and top section 7.58` in length and 2" by 2" by 1/8" thick. Each section has a 1`+ overlap. The mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable. Junction boxes are mounted at the top of the first stage and at the very top of the mast for equipment setup, connection, and deployment. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for customer-provided equipment. A half-moon shaped mounting plate on the top of the mast head provides a secure mounting platform for the NEMA 3R 12" x 12" x 6" junction box, where operatores can mount cameras, indicator lights, and route electrical cabling. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised. Component Control Center: All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes locks for security purposes. A 12" by 12" plate allows operators to mount user provided equipment within the job box. This control center houses the operator provided battery bank, which is designed to hold up to two 8D batteries. Trailer Assembly: The entire assembly is mounted to a 7.5` by 7`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The trailer tongue can be removed for long term deployment. A rugged and waterproof job box is included, safely secured to the trailer. Four outriggers mounted to the corners of the trailer allow operators to level the trailer, and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations. Specifications / Additional Information LM-30-8.5-5S-1XN3B-PW-NB-TLR7-120V-1X20A Trailer Mounted Light Mast Quick Summary Light Mast Specs 13.5` to 30` Light Mast Tower Length: 13.5` to 30` Steel Construction Mast Head Length: 44" Powder Coated Finish Materials: Steel Removable Mast Head Finish: Powder Coated - Gloss Blue (4) 1,000lb Outriggers Operation: (1) 1,000lbs Hand Winch 125 mph Wind Resistance Mast Cable: 3/16" Galvanized Aircraft Cable Manual or Optional Electric Operation Voltage: 120V AC Connector: (1) 120V 5-20C @ Top of Mast Wiring: 20` 12/3 SOOW Cord w/ Weatherproof 5-20P Cord Cap Trailer Specs Materials: Steel Trailer Dimensions: 7.5`L` x 7`W trailer bed- 10.75` total length Hitch: 2" Ball Coupler Wiring: 7-Pin Flat Axle: 3,500lb Suspension: 3,500 Lb 4-Leaf Double Eye Springs Outriggers: (4) 1,000 Manual Crack Leveling Jacks Wheels: (2) 15" 5x4.5 Steel Rims Tires: ST205/75/D15 H188 Special Orders- Requirements Weight: +-600 lbs Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: 8`-L x 8`-W x 12`-H Toll Free: 888-325-4448 Shipping Weight: +-600 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected]