Larson Electronics 26W Explosion Proof Emergency Floodlight - C1D2 - 2901 Lumens - 120-277VAC - Aluminum Housing - IP66

Made in the USA The HAL-EMG-KNL-26W-LED from Larson Electronics is an Explosion Proof Emergency LED Floodlight that is rated for Class I Division 2 Groups A, B, C & D hazardous environments and boasts a 100,000 hour lamp life expectancy. The HAL-EMG-KNL-26W-LED produces 2,901 lumens while drawing only 26 watts and operating on 120-277V AC current. This IP66 rated waterproof LED floodlight is ideal for C1D2 hazardous areas that require a powerful spread of high-intensity light and is suitable for both indoor and outdoor use including wet areas and ground mounting. This LED floodlight is equivalent to hot running 75W metal halide floodlights and makes an ideal and money saving replacement or alternative. This unit features a remote mount battery backup for emergency operation. The HAL-EMG-KNL-26W-LED explosion proof emergency LED floodlight features rugged and durable construction to allow it to stand up to harsh conditions and abusive environments. The die-cast aluminum housing is powder coated for further durability and corrosion resistance while the polycarbonate lens and silicone gaskets provide further degrees of protection and durability. The HAL-EMG-KNL-26W-LED weighs 12.5 pounds and features a 1/2" threaded die-cast aluminum mounting arm. This emergency LED light works, mounts and is wired like our HAL-EMG-KNL-26W LED light fixture. The main difference is that we add a remote mounted battery backup unit that adds emergency light functionality to the fixture. This emergency LED light will run at the standard UL suggested 90 minutes after power is lost at the full lumen output of 2,901 lumens. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency battery backup that is automatically recharged and kept in a ready state. The HAL-EMG-KNL-26W-LED C1D2 hazardous area LED floodlight projects the high-intensity LED light it produces in a NEMA 7H x 6V configuration. This means that the produced beam of light is wide in a vertical sense and very wide horizontally. To be more precise, the HAL-EMG-KNL-26W-LED has a vertical beam spread of 119¡ and a horizontal beam spread of 130¡. These beam spreads are more than enough to cover a large area that requires illumination. The light produced by this LED floodlight has a 5000K color temperature and a color rendering index of 67. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain external fins that provide superior heat sinking to the unit. This heat sink technology helps to preserve the life of the LEDs used in the HAL-EMG-KNL-26W-LED and contribute to the 100,000 hour rated service life of the unit. Mounting: The HAL-EMG-KNL-26W-LED is equipped with a heavy duty die-cast aluminum mounting arm. The 1/2" threaded mounting arm comes with an O-ring seal and a stainless steel screw for secure and easy mounting and installation. This explosion proof floodlight can be mounted indoors or outdoors and is also suitable for wet areas and ground mounting as well as the Class I, Division 2, Groups A, B, C, & D hazardous areas for which it is rated. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-EMG-KNL-26W-LED Explosion Proof Emergency LED Floodlight Ratings/Approvals Lamp Type: LED Class I, Division 2, Groups A, B, C & D Dimensions: 11"W x 10"H x 7.5" Depth UL 844 Weight: 20 lbs UL 1598 Voltage: 120-277V AC 50/60 Hz UL 8750 Watts: 26W IP66 Waterproof Lumens: 2,901 100,000 Hour LED Life Expectancy Luminous Efficacy: 111.6 Lm/W Shock and Vibration Resistant Color Temperature: 5000K Remote Mounted Emergency Battery Backup Color Rendering Index: 65 CRI 90 Minute Emergency Runtime Power Factor: 0.994 (99.4%) Made in the USA LED Life Expectancy: 100,000 Hours Lighting Configuration: NEMA 7H x 6V Operating Temperature: 135¡C Ambient Operating Temp Range: -40¡C to +40¡C Emergency Runtime: 90 Minutes Emergency Lumens: 2,901 Waterproof Rating: IP66 Housing Material: Die Cast Aluminum Housing Color: Grey Finish: Powder Coated Lens Material: Polycarbonate Mounting: Die-Cast Aluminum Mounting Arm w/ O-Ring Gasket & Stainless Steel Screw Led Driver Specs Type: Constant Current Special Orders- Requirements Amps: 0.24A @ 120V, 0.11A @ 277V Contact us for special requirements Input Watts: 41W Toll Free: 888-325-4448 Surge Protection: 4 kV Efficiency: 97% E-mail: [email protected] Scroll Down to Purchase-