Larson Electronics 25W Red LED Warning Spotlight - 2250 Lumens - 347/480V AC 1PH - Red Safety Light - IP67

The LEDWL-CRN-RED-480V.1P from Larson Electronics is a High Intensity Red LED Spotlight that is designed to provide a tight red light beam. This ultra compact red LED light produces a 2,250 lumen output with low amp draw and a 50,000 hour service life. Additionally, the LEDWL-CRN-RED-480V.1P features an external power source that allows the warning light to operate on 347-480V AC for industrial crane operations, with the ability to strobe. This provides operators with a versatile and powerful warning and indicator safety light. The LEDWL-CRN-RED-480V.1P red LED spotlight light from Larson Electronics produces 2,250 lumens of sharp red light. Five, 5-watt red LEDs producing 450 lumens each are combined with high purity optics to produce a narrow 5¡ degree spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. This particular unit is ultra compact at only 6" tall by 3.91" wide by 3.36" deep, which makes it ideal for applications where mounting space is at a premium. Durability: The LEDWL-CRN-RED-480V.1P LED light Larson Electronics offers IP67 rated construction that is designed to withstand the rigors of demanding of environmental and operating conditions yet are lighter and smaller than our LEDLB-E series of extreme duty light bars. The this series is designed to provide a low profile, light weight, high performance light bar that can be mounted where other lights will not fit. These units can operate in temperatures of -40¡ Celsius to 80¡ Celsius, are waterproof to 1 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Mounting: The LEDWL-CRN-RED-480V.1P is suspended with a U-bracket style trunnion with tension bolt allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount, allowing the unit to be installed anywhere a 1/2-inch hole can be drilled. Wiring/Power: The LEDWL-CRN-RED-480V.1P LED spotlight is equipped with Deustch connector and a 20` wiring harness. The external power supply is remote mountable. Operators can install the power supply between the light and the control station. The external power supply is designed to be hardwired and operates on voltages ranging from 347-480V AC. Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDWL-CRN-RED-480V.1P Red LED Warning and Indicator Strobing Light Ratings/Approvals Lamp Type: LED IP67 Waterproof to 1 Meter Dimensions: 6"-H x 3.91"-W x 3.59"-D Impact/Vibration Resistant Watts: 2 lbs Shatterproof Lens Voltage: 347-480V AC 1PH Ambient Op Temp -40¡C to +85¡C Watts: 25W Visible With High Illuminate Warehouse Lighting Lumens: 2,250 Luminous Efficacy: 90 Lm/W LED Light Color: Red LED Life Expectancy: 50,000 hours Led Drive %: 90% Lighting Configuration: 5¡ Spot Beam Ambient Operating Temp Range: -40¡C to +80¡C Housing Material: Die Cast Aluminum Housing Colors: Black Special Orders- Requirements Lens Material: Polycarbonate Contact us for special requirements Optic: PMMA Toll Free: 888-325-4448 Mounting:U-bracket style trunnion with tension bolt Intl: 1-214-616-6180 Wiring: 10` 16/3 SOOW Input with 20` 16/3 from Poly Box to Light E-mail: [email protected] Down to Purchase-