Larson Electronics 25W Portable Rechargeable LED Tripod Lighting System – 2,750 Lumens - Rechargeable Battery

The WAL-TP-RPS-1X25WRE-CPR Portable Rechargeable LED Tripod Lighting System from Larson Electronics provides portable and rechargeable illumination in remote locations. This 25-watt unit is equipped with a powerful LED light, mounted on a tripod tower, and a rechargeable battery pack. Offering a runtime of 4.25 hours per full charge, the steel tower can extend to 5.5 feet for elevated illumination. The WAL-TP-RPS-1X25WRE-CPR rechargeable LED light tower produces 2,750 lumens of bright light while drawing less than 2.25 amps from a 12 volt electrical system. A single, CREE 25 watt LED producing 2750 lumen is combined with high output reflector to produce a narrow 10 degree spread spot beam approximately 1000’ long combined with a 60¡ flood beam. This combination spot and flood beam provides both distance and width from a single light source. The LED light is waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. CONDITIONS Vin min (V) = 9 toff (us) = 2.9 Vin nom (V) = 12 R1 (kohm) = 50.2 Vin max (V) = 32 L1 (uH) = 3.0 Vo min (V) = 6.5 L-Pk (A) = 2.9 Vo nom (V) = 6.8 L-rms (A) = 2.9 Vo max (V) = 7 Ipk (A) = 2.5 I-LED (A) = 2.2 R2 (ohm) = 0.10 Efficiency = .85 I-FET (A) = 2.2 fsw nom (kHz) = 150 fs min (kHz) = 77 Ts nom (us) = 6.666667 fs max (kHz) = 301 Base frequency- = 36~37Khz @ 12V Amplitude of pulse width- = 27Ms Outside: External dimmer- = 500Hz Inside : Current sensing from- 77KHz at 12V to 300KHz at 50V LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Tower: Though the tower on the WAL-TP-RPS-1X25WRE-CPR is ruggedly built for heavy duty use, its design is focused on versatility and operator ease of use. Constructed from iron and coated in a yellow finish for added durability and corrosion resistance, this light tower measures 5.5` tall when fully deployed and weighs just under 20 lbs. This 3-stage telescoping tower can be vertically adjusted to fit the work space loosening/tightening the hand knobs on center support, and the LED light assembly can be removed and used as a handheld light by loosening the hand knob at the top of the center support and simply sliding the fixture off the pole. For compact storage and transport, the entire tower can be collapsed and the tripod legs folded down. The tower and light assembly can then be stowed in the included carrying bag. Both the light tower bag and the battery bag are equipped with shoulder straps for operator convenience. Power: The WAL-TP-RPS-1X25WRE-CPR offers operators versatile power options that make it perfect for mobile lighting needs. This light unit can be run on either the rechargeable 12V8.8Ah lithium battery or connected to a vehicle charger using the included 13` lead equipped with a cigarette lighter plug. The lithium battery comes in a portable bag with a convenient shoulder belt for easy transport and has a run time of 4.25 hours. Recharging from a fully depleted state takes 8-10 hours using the included AC/DC charger. Applications: Industrial and Mining Applications, Tunnel Construction, Line Maintenance, Power Plants, Emergency Rescue, Medical Assistance, Fire, Police, Military At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information WAL-TP-RPS-1X25WRE-CPR LED Tripod Tower Ratings Lamp Type: CREE LED Fast Average Current Control Lamp Dimensions: 5.75" x 4.36" Programmable Off-time Switching Total Height: 5.5` Linear Dimming Input Weight: - Short Protection w/ Skip Mode Voltage: 12V DC (Used with Vehicle Charger) Rechargeable Battery Pack Battery: 12V 8.8ah Li-Ion Runtime: 4.25 Hours Total Watts: 25W Total Lumens: 2,750 LED Lamp Life Expectancy: 50,000+ Hours Lighting Configuration: Spot Beam Spot Beam: 1,000` L Ambient Operating Temperature: -40C to +85C Tower Material: Steel Special Orders- Requirements LED Housing Material: Aluminum Contact us for special requirements Lens Material: Polycarbonate Toll Free: 888-325-4448 Mounting: Portable Tripod Tower Intl: 1-214-616-6180 Plug: Cigarette Plug E-mail: [email protected] Down to Purchase